Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Inside doors
Need to replace doors. They are 1/4 inch narrower than stock doors.
-- for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm |
#2
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sat, 04 Mar 2017 20:44:02 GMT, Linda m wrote:
Need to replace doors. They are 1/4 inch narrower than stock doors. You could move the stops on the jamb, adjust the mortises as required to make the thicker doors fit and reinstall the stops, or pay a lot more to have non-standard doors made. The choice is yours. |
#3
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On 3/4/17 4:19 PM, Gordon Shumway wrote:
On Sat, 04 Mar 2017 20:44:02 GMT, Linda m wrote: Need to replace doors. They are 1/4 inch *narrower* than stock doors. You could move the stops on the jamb, adjust the mortises as required to make the thicker doors fit and reinstall the stops, or pay a lot more to have non-standard doors made. The choice is yours. If Linda means the old doors are "thinner" in thickness, then moving the jambs and hinges might work to accommodate a thicker door. But if she means "narrower" in width, then possibly she could have 1/8" inch trimmed off each side by someone with appropriate tools, etc. |
#4
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 3:44:06 PM UTC-5, Linda wrote:
Need to replace doors. They are 1/4 inch narrower than stock doors. You haven't provided enough information. In fact, you haven't even asked a question. What kind of doors? 6 panel pine? Slabs? Something else? Are you replacing doors and jambs or just the doors? If you plan to get pre-hung doors (which includes the jambs) you may find that your rough opening is wide enough for "stock" doors. They may have shimmed the rough opening so the current doors fit. You may find it cheaper to get pre-hung doors and deal with the rough opening than getting custom doors made. On the other hand, we don't know where you looked for doors and what you are considering "stock". There are other places to buy doors than the big box stores. Have you considered looking at places that sell architectural salvage? They usually have hundreds of doors in all all kinds of sizes. |
#5
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sat, 04 Mar 2017 20:44:02 GMT, Linda
m wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. Its like counting feet. If you get an odd number, add 1 and divide by 2. It tells you how many feet you have. Or maybe not if one foot is missing. |
#6
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote:
Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. |
#7
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 5:33:33 PM UTC-6, ItsJoanNotJoann wrote:
On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Um, ItsJoanNotJoann, Linda asked a legitimate home improvement question. It's the homeownershub.com site that sent her post to Usenet. I'm guessing that she has no idea what Usenet is. γ½(γ )γ [8~{} Uncle Moaning Monster |
#8
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On 3/4/17 5:33 PM, ItsJoanNotJoann wrote:
On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Linda didn't quite ask a formal question the gist of her problem surfaced. There is this Chinese quote: He who asks a question is a fool for five minutes; he who does not ask a question remains a fool forever. From: http://thinkexist.com/quotation/he_who_asks_a_question_is_a_fool_for_five_minutes/164844.html |
#9
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sat, 4 Mar 2017 16:29:09 -0500, Retired wrote:
On 3/4/17 4:19 PM, Gordon Shumway wrote: On Sat, 04 Mar 2017 20:44:02 GMT, Linda m wrote: Need to replace doors. They are 1/4 inch *narrower* than stock doors. You could move the stops on the jamb, adjust the mortises as required to make the thicker doors fit and reinstall the stops, or pay a lot more to have non-standard doors made. The choice is yours. If Linda means the old doors are "thinner" in thickness, then moving the jambs and hinges might work to accommodate a thicker door. Ahh, my light bulb just came on. I immediately envisioned a "thinner" door rather than a "narrower" door. But if she means "narrower" in width, then possibly she could have 1/8" inch trimmed off each side by someone with appropriate tools, etc. |
#10
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sat, 04 Mar 2017 19:26:55 -0600, Gordon Shumway
wrote: On Sat, 4 Mar 2017 16:29:09 -0500, Retired wrote: On 3/4/17 4:19 PM, Gordon Shumway wrote: On Sat, 04 Mar 2017 20:44:02 GMT, Linda m wrote: Need to replace doors. They are 1/4 inch *narrower* than stock doors. You could move the stops on the jamb, adjust the mortises as required to make the thicker doors fit and reinstall the stops, or pay a lot more to have non-standard doors made. The choice is yours. If Linda means the old doors are "thinner" in thickness, then moving the jambs and hinges might work to accommodate a thicker door. Ahh, my light bulb just came on. I immediately envisioned a "thinner" door rather than a "narrower" door. But if she means "narrower" in width, then possibly she could have 1/8" inch trimmed off each side by someone with appropriate tools, etc. You are usually better off trimming the hinge side than the knob side if the door is already drilled, It is a whole lot easier morticing for hinges than it is moving the door knob hole over so the lock set fits. If it is not drilled, then go ahead and split the difference from each side then drill. |
#11
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 10:49:26 PM UTC-6, wrote:
On Sat, 04 Mar 2017 19:26:55 -0600, Gordon Shumway wrote: On Sat, 4 Mar 2017 16:29:09 -0500, Retired wrote: On 3/4/17 4:19 PM, Gordon Shumway wrote: On Sat, 04 Mar 2017 20:44:02 GMT, Linda m wrote: Need to replace doors. They are 1/4 inch *narrower* than stock doors.. You could move the stops on the jamb, adjust the mortises as required to make the thicker doors fit and reinstall the stops, or pay a lot more to have non-standard doors made. The choice is yours. If Linda means the old doors are "thinner" in thickness, then moving the jambs and hinges might work to accommodate a thicker door. Ahh, my light bulb just came on. I immediately envisioned a "thinner" door rather than a "narrower" door. But if she means "narrower" in width, then possibly she could have 1/8" inch trimmed off each side by someone with appropriate tools, etc. You are usually better off trimming the hinge side than the knob side if the door is already drilled, It is a whole lot easier morticing for hinges than it is moving the door knob hole over so the lock set fits. If it is not drilled, then go ahead and split the difference from each side then drill. Back at the house I have solid wood frame panel doors that have a one and three eights inch thick frame with three 1/4" plywood panels. I know this since we looked into replacing one with a broken panel because of a housemate's crazy girlfriend going nuts and trying to break down the door. Crazy people break things. I could have sworn she turned green during her episodes. Hulkette Smash! ( ΰ²*_ΰ²*) [8~{} Uncle Green Monster |
#12
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On 3/4/2017 3:44 PM, Linda wrote:
Need to replace doors. They are 1/4 inch narrower than stock doors. Are they Luan Oak or Sitka Maple? Can you post some pictures? Do you have a 5hp chainsaw? |
#13
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 8:17:11 PM UTC-5, Uncle Monster wrote:
On Saturday, March 4, 2017 at 5:33:33 PM UTC-6, ItsJoanNotJoann wrote: On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Um, ItsJoanNotJoann, Linda asked a legitimate home improvement question. It's the homeownershub.com site that sent her post to Usenet. I'm guessing that she has no idea what Usenet is. γ½(γ )γ [8~{} Uncle Moaning Monster In addition, if things haven't changed, the OP will not see any negative comments about herself or the HOH site. Back when the Stormin Mormon was still with us, he used denigrate every HOH post that found its way into a.h.r. I did some checking over at HOH and found that only "legitimate" responses were in the thread. Since it's a moderated forum, they filtered out all of the SM's negative comments. He was disappointed. Cousin Detective Monster |
#14
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 6:33:33 PM UTC-5, ItsJoanNotJoann wrote:
On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. You are so right. Anyone wanting home repair advice should only post where home repair subjects are given top priority. As an example, let's see how a.h.r has done recently. Top Threads Ranking Articles Subject ------- -------- ---------------------------------- 1 797 American mailboxes 2 356 9th Circuit Court went more stupid 3 303 Make Usenet Great Again 4 199 Donald trump 5 170 Trump to crack down on recreational Cannabis users 6 156 The Myth of the Good Guy With the Gun 7 128 OT: Feeling cold 8 124 Trump Triumphs Over Press 9 101 Cash No Longer King: Europe Accelerates Move To Begin Elimination Of Paper Money 10 81 OT: Och aye! 11 75 [FoxNews]A small town's sudden power surge fried tech gear in hundreds of homes 12 75 Hum Sound in House 13 75 Lighting water heater pilot light (shouldn't it stink?) 14 71 Electrical advice-30A circuits 15 67 OT: drinking alcohol and water 16 60 British vs. American English 17 55 Real photos of Highway 17 and Skyline in the Santa Cruz Mountains this week 18 52 Vizio spying 19 49 Jeff Sessions Has Just Been Confirmed! 20 48 Electrical 21 48 European police issue warning as foldable gun which looks like iPhone to be released in US 22 46 Trump finally shows his hand 23 45 OT, Truth About Sweden 24 42 does anyone make a decent wiper blade? 25 38 OT: What is this tune? |
#15
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sun, 5 Mar 2017 04:32:59 -0800 (PST), DerbyDad03
wrote: Back when the Stormin Mormon was still with us, he used denigrate every HOH post that found its way into a.h.r. I did some checking over at HOH and found that only "legitimate" responses were in the thread. Since it's a moderated forum, they filtered out all of the SM's negative comments. He was disappointed. Cousin Detective Monster The Home Groaner Hub did the same back when Red Green was still around. I eventually was promoted into the exclusive club, with honors. Cousin Home Groaner Hub Flunkie |
#16
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sunday, March 5, 2017 at 8:43:30 PM UTC-6, Oren wrote:
On Sun, 5 Mar 2017 04:32:59 -0800 (PST), DerbyDad03 wrote: Back when the Stormin Mormon was still with us, he used denigrate every HOH post that found its way into a.h.r. I did some checking over at HOH and found that only "legitimate" responses were in the thread. Since it's a moderated forum, they filtered out all of the SM's negative comments. He was disappointed. Cousin Detective Monster The Home Groaner Hub did the same back when Red Green was still around. I eventually was promoted into the exclusive club, with honors. Cousin Home Groaner Hub Flunkie Me too, me too! I looked and my sarcastic responses weren't there. γ½(’Ώ’)γ [8~{} Uncle Mean Monster |
#17
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sun, 5 Mar 2017 20:13:06 -0800 (PST), Uncle Monster
wrote: On Sunday, March 5, 2017 at 8:43:30 PM UTC-6, Oren wrote: On Sun, 5 Mar 2017 04:32:59 -0800 (PST), DerbyDad03 wrote: Back when the Stormin Mormon was still with us, he used denigrate every HOH post that found its way into a.h.r. I did some checking over at HOH and found that only "legitimate" responses were in the thread. Since it's a moderated forum, they filtered out all of the SM's negative comments. He was disappointed. Cousin Detective Monster The Home Groaner Hub did the same back when Red Green was still around. I eventually was promoted into the exclusive club, with honors. Cousin Home Groaner Hub Flunkie Me too, me too! I looked and my sarcastic responses weren't there. ?(?)? [8~{} Uncle Mean Monster When you ask a probing question they get OFFENDED. Like, what is the model number. Can you post a link? If the car doesn't start, did you turn the key? |
#18
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Saturday, March 4, 2017 at 7:17:11 PM UTC-6, Uncle Monster wrote:
On Saturday, March 4, 2017 at 5:33:33 PM UTC-6, ItsJoanNotJoann wrote: On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Um, ItsJoanNotJoann, Linda asked a legitimate home improvement question. It's the homeownershub.com site that sent her post to Usenet. I'm guessing that she has no idea what Usenet is. γ½(γ )γ [8~{} Uncle Moaning Monster No, she really didn't ask a legitimate question. She made a statement and wanted people here to decipher what she was asking/saying. As far as that stupid HomeOwners site it's just like another site that another group contended with a couple of years ago known as Food Banter. They copied and mirrored questions asked on the cooking group. Everything there on F.B.was nothing but a copy of that group. People would post a greeting and were never to be heard of again just like HomeMoaners. |
#19
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sunday, March 5, 2017 at 10:30:23 PM UTC-6, Oren wrote:
On Sun, 5 Mar 2017 20:13:06 -0800 (PST), Uncle Monster wrote: On Sunday, March 5, 2017 at 8:43:30 PM UTC-6, Oren wrote: On Sun, 5 Mar 2017 04:32:59 -0800 (PST), DerbyDad03 wrote: Back when the Stormin Mormon was still with us, he used denigrate every HOH post that found its way into a.h.r. I did some checking over at HOH and found that only "legitimate" responses were in the thread. Since it's a moderated forum, they filtered out all of the SM's negative comments. He was disappointed. Cousin Detective Monster The Home Groaner Hub did the same back when Red Green was still around. I eventually was promoted into the exclusive club, with honors. Cousin Home Groaner Hub Flunkie Me too, me too! I looked and my sarcastic responses weren't there. ?(’?’)? [8~{} Uncle Mean Monster When you ask a probing question they get OFFENDED. Like, what is the model number. Can you post a link? If the car doesn't start, did you turn the key? I think the moderator or moderators have a blacklist. I'm honored to be on it if that's the case. γ½(’Ώ’)γ [8~{} Uncle Happy Monster |
#20
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sunday, March 5, 2017 at 6:33:07 AM UTC-6, DerbyDad03 wrote:
On Saturday, March 4, 2017 at 8:17:11 PM UTC-5, Uncle Monster wrote: On Saturday, March 4, 2017 at 5:33:33 PM UTC-6, ItsJoanNotJoann wrote: On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Um, ItsJoanNotJoann, Linda asked a legitimate home improvement question.. It's the homeownershub.com site that sent her post to Usenet. I'm guessing that she has no idea what Usenet is. γ½(γ )γ [8~{} Uncle Moaning Monster In addition, if things haven't changed, the OP will not see any negative comments about herself or the HOH site. Back when the Stormin Mormon was still with us, he used denigrate every HOH post that found its way into a.h.r. I did some checking over at HOH and found that only "legitimate" responses were in the thread. Since it's a moderated forum, they filtered out all of the SM's negative comments. He was disappointed. Cousin Detective Monster Yes, she WILL see negative posts if she's got sense enough to go back to that silly site and read the responses. |
#21
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sunday, March 5, 2017 at 11:02:41 PM UTC-6, Uncle Monster wrote:
I think the moderator or moderators have a blacklist. I'm honored to be on it if that's the case. γ½(’Ώ’)γ [8~{} Uncle Happy Monster I must have not reached that honored state yet. My statement to her is there to be read. |
#22
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Sunday, March 5, 2017 at 10:58:45 PM UTC-6, ItsJoanNotJoann wrote:
On Saturday, March 4, 2017 at 7:17:11 PM UTC-6, Uncle Monster wrote: On Saturday, March 4, 2017 at 5:33:33 PM UTC-6, ItsJoanNotJoann wrote: On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Um, ItsJoanNotJoann, Linda asked a legitimate home improvement question.. It's the homeownershub.com site that sent her post to Usenet. I'm guessing that she has no idea what Usenet is. γ½(γ )γ [8~{} Uncle Moaning Monster No, she really didn't ask a legitimate question. She made a statement and wanted people here to decipher what she was asking/saying. As far as that stupid HomeOwners site it's just like another site that another group contended with a couple of years ago known as Food Banter. They copied and mirrored questions asked on the cooking group. Everything there on F.B.was nothing but a copy of that group. People would post a greeting and were never to be heard of again just like HomeMoaners. Many people don't know how to frame(no pun) a question about carpentry or other home improvement problems they are having. I don't have a problem with them as long as they're polite because I've dealt with the construction and technically challenged crowd for so many years. The OP got on The Internet looking for help and I don't blame her because the post wound up here in this newsgroup. The Home Owners Hub is less offensive than the crop of nasty trolls flooding the newsgroup so I'm not bothered by posts from HOH because at least the posts are on topic. If anyone is to blame, it's whoever runs HOH because I don't think the dates from 10 year old or any original posts are being displayed and the people going to HOH haven't a clue that the OP they're responding to could be long dead and buried. γ½(γ )γ [8~{} Uncle Post Monster |
#23
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On 03/06/2017 12:25 AM, Uncle Monster wrote:
Many people don't know how to frame(no pun) a question about carpentry or other home improvement problems they are having. I don't have a problem with them as long as they're polite because I've dealt with the construction and technically challenged crowd for so many years. The OP got on The Internet looking for help and I don't blame her because the post wound up here in this newsgroup. The Home Owners Hub is less offensive than the crop of nasty trolls flooding the newsgroup so I'm not bothered by posts from HOH because at least the posts are on topic. If anyone is to blame, it's whoever runs HOH because I don't think the dates from 10 year old or any original posts are being displayed and the people going to HOH haven't a clue that the OP they're responding to could be long dead and buried. γ½(γ )γ [8~{} Uncle Post Monster Linda appears to be just another drive-by poster. |
#24
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Monday, March 6, 2017 at 3:24:33 AM UTC-6, Dan Mathews wrote:
On 03/06/2017 12:25 AM, Uncle Monster wrote: Many people don't know how to frame(no pun) a question about carpentry or other home improvement problems they are having. I don't have a problem with them as long as they're polite because I've dealt with the construction and technically challenged crowd for so many years. The OP got on The Internet looking for help and I don't blame her because the post wound up here in this newsgroup. The Home Owners Hub is less offensive than the crop of nasty trolls flooding the newsgroup so I'm not bothered by posts from HOH because at least the posts are on topic. If anyone is to blame, it's whoever runs HOH because I don't think the dates from 10 year old or any original posts are being displayed and the people going to HOH haven't a clue that the OP they're responding to could be long dead and buried. γ½(γ )γ [8~{} Uncle Post Monster Linda appears to be just another drive-by poster. Yea, but she isn't a nasty troll. γ½(γ )γ [8~{} Uncle Despicable Monster |
#25
Posted to alt.home.repair
|
|||
|
|||
Inside doors
On Monday, March 6, 2017 at 12:25:30 AM UTC-5, Uncle Monster wrote:
On Sunday, March 5, 2017 at 10:58:45 PM UTC-6, ItsJoanNotJoann wrote: On Saturday, March 4, 2017 at 7:17:11 PM UTC-6, Uncle Monster wrote: On Saturday, March 4, 2017 at 5:33:33 PM UTC-6, ItsJoanNotJoann wrote: On Saturday, March 4, 2017 at 2:44:06 PM UTC-6, Linda wrote: Need to replace doors. They are 1/4 inch narrower than stock doors. for full context, visit https://www.homeownershub.com/mainte...s-1126164-.htm Be our guest, dummy. To post on this stupid HomeMoaners site the requirements must entail being a complete idiot. Linda has not disappointed. Um, ItsJoanNotJoann, Linda asked a legitimate home improvement question. It's the homeownershub.com site that sent her post to Usenet. I'm guessing that she has no idea what Usenet is. γ½(γ )γ [8~{} Uncle Moaning Monster No, she really didn't ask a legitimate question. She made a statement and wanted people here to decipher what she was asking/saying. As far as that stupid HomeOwners site it's just like another site that another group contended with a couple of years ago known as Food Banter. They copied and mirrored questions asked on the cooking group. Everything there on F.B.was nothing but a copy of that group. People would post a greeting and were never to be heard of again just like HomeMoaners. Many people don't know how to frame(no pun) a question about carpentry or other home improvement problems they are having. I don't have a problem with them as long as they're polite because I've dealt with the construction and technically challenged crowd for so many years. The OP got on The Internet looking for help and I don't blame her because the post wound up here in this newsgroup. The Home Owners Hub is less offensive than the crop of nasty trolls flooding the newsgroup so I'm not bothered by posts from HOH because at least the posts are on topic. If anyone is to blame, it's whoever runs HOH because I don't think the dates from 10 year old or any original posts are being displayed and the people going to HOH haven't a clue that the OP they're responding to could be long dead and buried. γ½(γ )γ [8~{} Uncle Post Monster +1 I'll bet that if that post not originated in HOH, IJNJ would not responded in the same manner. She might have even offered advice or tried to garner some more info. Cousin Agreeable Monster |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|