Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Ed Kaz
 
Posts: n/a
Default Ice Skateing Rink Lighting

Is it possible to place lighting UNDER ice ?

I would guess it would have to be low voltage lighting!

Has anyone done this???

Thanks
Ed


  #2   Report Post  
CLSSM00X7
 
Posts: n/a
Default Ice Skateing Rink Lighting

Hi,

If you can get under the ice it is possible yes. Is the rink inside and using
a mechanical freezing system? If so the heat from the lamps shouldn't affect it
or melt it. I have seen ice carvings lit up and the colored lights really made
them beautiful. I wouldn't put the lamps too close to the ice if you use
anything over 40 watts. Make sure they are waterproof exterior fixtures with a
GFCI circuit breaker feeding them. I like the idea you want to try.

candice




  #3   Report Post  
David Martel
 
Posts: n/a
Default Ice Skateing Rink Lighting

I think that the heat from the bulbs would be a major problem. I bet that
the bulbs would shatter. Expansion and contraction would be a problem. Light
pipes made from fiber optics would be a possibility.

Good luck,
Dave M.


  #4   Report Post  
I-zheet M'drurz
 
Posts: n/a
Default Ice Skateing Rink Lighting

On 12 Nov 2003, David Martel wrote:

I think that the heat from the bulbs would be a major problem. I
bet that
the bulbs would shatter. Expansion and contraction would be a problem.
Light pipes made from fiber optics would be a possibility.


Not to mention that ice is naturally more opaque than clear. It
would take a very bright (read "hot") light to be seen.

That said, I think we both just responded to a troll, but what
the hell, you never know.


--
Baisez-les s'ils ne peuvent pas prendre une plaisanterie
--------------------------------------------------------
Tom Pendergast e-mail is for sissies, say it on line
  #5   Report Post  
Ed Kaz
 
Posts: n/a
Default Ice Skateing Rink Lighting

Who you calling a "troll"?-jerk

I can't ask a simple question ?

I am putting in a back-yard rink and was wondering if lighting from under
the ice was possible?



"I-zheet M'drurz" wrote in message
...
On 12 Nov 2003, David Martel wrote:

I think that the heat from the bulbs would be a major problem. I
bet that
the bulbs would shatter. Expansion and contraction would be a problem.
Light pipes made from fiber optics would be a possibility.


Not to mention that ice is naturally more opaque than clear. It
would take a very bright (read "hot") light to be seen.

That said, I think we both just responded to a troll, but what
the hell, you never know.


--
Baisez-les s'ils ne peuvent pas prendre une plaisanterie
--------------------------------------------------------
Tom Pendergast e-mail is for sissies, say it on line





  #6   Report Post  
I-zheet M'drurz
 
Posts: n/a
Default Ice Skateing Rink Lighting

On 12 Nov 2003, Ed Kaz wrote:

Who you calling a "troll"?-jerk


If the shoe fits, wear it.

I can't ask a simple question ?


Sometimes the questions are just a bit -too- simple, that's
why you tend to think you're being "baited", by a troll.

I am putting in a back-yard rink and was wondering if lighting
from under the ice was possible?


What part has you stumped? The idea of submersing electrical
wiring in frozen water? Or somehow isolating the lights
under, ohhhh, maybe a bigass sheet of glass that will support
the weight of the ice??? Yeah, those ideas will work. Go
for it, Sparky.

--
Baisez-les s'ils ne peuvent pas prendre une plaisanterie
--------------------------------------------------------
Tom Pendergast e-mail is for sissies, say it on line
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shop Lighting - Electrical Wiring x071907 Woodworking 6 March 11th 04 01:41 AM
Fluorescent lighting advice Paul Moore UK diy 6 February 11th 04 02:16 PM
dimmer switches for multiple lighting zones Seamus Mc Loughlin UK diy 0 February 4th 04 05:42 PM
LV Lighting supply dilemma andrewpreece UK diy 7 January 6th 04 05:29 PM


All times are GMT +1. The time now is 07:20 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"