Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
220 Volt Plugs
Our greenhouse heater wore out after a number of years so we bought a replacement. It's essentially the same heater except that the new one is a different color and the plug is a different configuration. The old one has one round pin and two flat blades, with the blades at an angle to each other and above the round pin. The new one also has one round pin and two flat blades but the blades are lined up with each other, so I have to replace the receptacle with one that matches the new plug. Not a major project, just a minor annoyance and expense.
I've seen other 220 volt plug configurations; some have an L-shaped blade instead of the round pin, others have four blades in a circular pattern which lock when turned, etc. Is there any practical reason for all these variations? Paul |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Heads up on 1 day sale. Dewalt 18 volt drill, 7.2 volt driver, charger and case $133.00 Free shipping from Home Depot. | Woodworking | |||
Connecting a 110 Volt 300 watt generator to a 220 Volt panel | Home Repair | |||
Rawl plugs / wall plugs - what's the secret? | UK diy | |||
Run a 9.6 volt Makita drill off 12 volt car battery - voltatage dropping resistor ? | Electronics Repair | |||
Can you derive a 110 volt outlet from a 4 wire 220 volt in the US? | Home Repair |