Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#8
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
On Tue, 15 Jun 2010 07:48:43 -0700 (PDT), DerbyDad03
wrote: This question is about the decision process involved with replacing the timing belt in a vehicle "now" or "later". Let's not confuse the issue with cost or voiding warranties, etc. Let's assume there is no warranty to deal with and that the cash is readily available, both now and later. Here's the situation a friend and I were discussing the other day: The manual - and therefore the dealer - says the timing belt on his vehicle should be replaced at 90K, which is right where he's at. He called around to various repair shops for a price and multiple places told him "I've never seen a timing belt go on that vehicle before 110K. The dealers just want their money early. There's no need to replace it at 90K." He was even able to "verify" that opinion on the web. OK, so let's say that you are planning to keep the vehicle for the foreseeable future, probably well beyond 110K. That means that you will need to replace the timing belt, probably in about a year, to be safe. So here's what I was thinking: There's a pretty slim chance that you'll keep the vehicle for the full life of the second timing belt. That would put you in the 220K range. Even if you replaced it at 90K and it really will last 110K, that's still pushing 200K. Why would you wait until next year and not replace it at 90K? Even at the dealer's "accelerated" schedule, you're good until 180K, by which time you'll probably have gotten rid of the car, so why not be *extra* cautious and replace it now? Thoughts? You don't say what kind of car / which engine. Many are SHOT if you wait for the belt to fail. It's your nickel, but I'd rather replace it sooner than replace the engine. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Timing/ power trans. belt | Metalworking | |||
pitch = timing belt pulleys tooth spacing ? | Metalworking | |||
How to replace the blower drive belt on snowblower? | Home Repair | |||
Replace belt in Hotpoint tumble dryer? | UK diy | |||
Timing belt supplier | Metalworking |