We are part way thru with a major remodel in our house and we picked
up a load of nice Pergo and have done two back rooms in the house. We
are getting ready to start the main part of the house (great room +
dining room combined) but we'd like to get a better warm and fuzzy
feeling about something before we start to tackle this.

In both rooms we've done so far, we have noticed that the majority of
the end to end mating joints of the Pergo, there is a very slight edge
you can feel. If you look you really can't hardly see this, but if
you run your hand (or better yet, your finger nail) across the joint,
you can feel a slight sharp edge where one section of Pergo slightly
sticks up from the other. Guess we're curious if this is normal or if
there's something going on we should know about before hitting the
major rooms.

Suggestions and comments welcomed! :O)