Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Cone Shaped PVC Washer - Which Way Should it Face?
I've always been confused as to which way the cone-shaped plastic
washer should face when installing kitchen sink PVC tubing - there are 2 configurations - one is from nut + inside washer + thread and the other is from nut + sliding washer on tube body + thread. Which way should the tapered or pointed end face in either case? The first one has a flange and the second one simply slides on the tube body. Do they both face the same direction, and if so, which way, and if not, which tapered end faces which way relative to the inside of the nut? Thanks for a quick reply - the sink is leaking like crazy. IB |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
The name of C shaped washer please! | UK diy | |||
Propane Torch Flame - Cone or no Cone? | Home Repair | |||
Dixon ZTR "cone drive" mower, needs cone shaft bearings | Home Repair | |||
basic fixings - cone-shaped washer. | UK diy | |||
Face Frame: Modified Pan Head or Round Washer head screws | Woodworking |