Do not move the washing machine until you open the top of the box and
check the following:


The Valve, Water Inlet W/Thermistor & Vacuum Break (valve body, valve
manifold, valve assembly) part #: W10144820 may be missing its
mounting screw. The valve incorporates the hot and cold inlets that
stick out from the center of the back of the unit just below the
control panel. This mounting screw is located between the hot and cold
inlets and secures the valve to the rear panel from the back along
with four plastic tabs that are also a part of the valve body. You
should see a small screw head when you look at the back of the unit
between the hot and cold inlets which are clearly visible. If this
screw is missing do not move the unit. The four plastic tabs may not
be enough to keep the valve braced against the rear panel. If the
valve becomes loose it may break as well as causing the tub ring part
#: W10168523 to break.

If you buy this model or any other make or model of washing machine:
What to check when you buy a washing machine:
What to look for when you buy a washing machine:


Make sure that the basket (tub, drum) is braced in some way and is not
freely moving, on top loading machines, back and forth or from side to
side. Usually you will find that it is secured at the factory by a
Styrofoam or cardboard packing material. Make sure this packing
material is securely in place and braced. Some models may have bolts
that are removed after moving that serve the same purpose. If you move
any brand and make of washing machine where the tub is loose it may be
damaged during transportation.

Make sure to tape the top of the box back-up after inspection to keep
the box from getting damaged during moving.