Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
D J D J is offline
external usenet poster
 
Posts: 18
Default Gas Pipe Install Question - attaching to the wall studs - what isbest way?

Folks,

Sorry for not so smart question, but, I am getting confused and need
some good advise from pros who have done some work.

I am doing Gas pile in my house. I know all those things about risks
and other, so let us keep it aside. I am doing pressure test on every
bit.. to make sure no leaks and using right wrenches (12 inch and 18
inch for 1# pipe).

What I am a lil confused is, how to attach to the wall. Both HD and
lowes has ring type thing and also, brackets.. Is that what generally
is used? are they strong enough that with them in place and pie in
them, we can screw the connections securely? Only experience can teach
here, so don't want to end up making mistake and hence asking the
pros.. ..

thanks for the answer in advance...

BTW, the 1 inch pipe run in both horizontal (through attic) and
vertical (From attic to the utility room where my appliances are
located)

DJ
  #2   Report Post  
Posted to alt.home.repair
EXT EXT is offline
external usenet poster
 
Posts: 1,661
Default Gas Pipe Install Question - attaching to the wall studs - what is best way?

There are a number commercially available pipe hangers available to use to
hold the gas pipe. What is available in your area I do not know.

Remember to use a tee at the bottom of your vertical drop down to the
appliances and install a 6 inch capped nipple to catch dust, dirt and
moisture so it does not go into the appliance. It is part of the gas pipe
code.

"D J" wrote in message
...
Folks,

Sorry for not so smart question, but, I am getting confused and need
some good advise from pros who have done some work.

I am doing Gas pile in my house. I know all those things about risks
and other, so let us keep it aside. I am doing pressure test on every
bit.. to make sure no leaks and using right wrenches (12 inch and 18
inch for 1# pipe).

What I am a lil confused is, how to attach to the wall. Both HD and
lowes has ring type thing and also, brackets.. Is that what generally
is used? are they strong enough that with them in place and pie in
them, we can screw the connections securely? Only experience can teach
here, so don't want to end up making mistake and hence asking the
pros.. ..

thanks for the answer in advance...

BTW, the 1 inch pipe run in both horizontal (through attic) and
vertical (From attic to the utility room where my appliances are
located)

DJ


  #3   Report Post  
Posted to alt.home.repair
D J D J is offline
external usenet poster
 
Posts: 18
Default Gas Pipe Install Question - attaching to the wall studs - what isbest way?

On May 14, 1:27 pm, "EXT" wrote:
There are a number commercially available pipe hangers available to use to
hold thegaspipe. What is available in your area I do not know.

Remember to use a tee at the bottom of your vertical drop down to the
appliances and install a 6 inch capped nipple to catch dust, dirt and
moisture so it does not go into the appliance. It is part of thegaspipe
code.

"D J" wrote in message

...

Folks,


Sorry for not so smart question, but, I am getting confused and need
some good advise from pros who have done some work.


I am doingGaspile in my house. I know all those things about risks
and other, so let us keep it aside. I am doing pressure test on every
bit.. to make sure no leaks and using right wrenches (12 inch and 18
inch for 1# pipe).


What I am a lil confused is, how to attach to the wall. Both HD and
lowes has ring type thing and also, brackets.. Is that what generally
is used? are they strong enough that with them in place and pie in
them, we can screw the connections securely? Only experience can teach
here, so don't want to end up making mistake and hence asking the
pros.. ..


thanks for the answer in advance...


BTW, the 1 inch pipe run in both horizontal (through attic) and
vertical (From attic to the utility room where my appliances are
located)


DJ


oh, i did dirt dip with 4 inches.. would it work?? I live in NJ/NY
area. also, does it need to be done for all appliances. one plumber
friend yesterday told me that only for furnace and gas water heater..
not required for range and the dryer.. I don't mind doing it either
way.. just curious..
  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 205
Default Gas Pipe Install Question - attaching to the wall studs - whatis best way?

D J wrote:

On May 14, 1:27 pm, "EXT" wrote:

There are a number commercially available pipe hangers available to use to
hold thegaspipe. What is available in your area I do not know.

Remember to use a tee at the bottom of your vertical drop down to the
appliances and install a 6 inch capped nipple to catch dust, dirt and
moisture so it does not go into the appliance. It is part of thegaspipe
code.

"D J" wrote in message

...


Folks,


Sorry for not so smart question, but, I am getting confused and need
some good advise from pros who have done some work.


I am doingGaspile in my house. I know all those things about risks
and other, so let us keep it aside. I am doing pressure test on every
bit.. to make sure no leaks and using right wrenches (12 inch and 18
inch for 1# pipe).


What I am a lil confused is, how to attach to the wall. Both HD and
lowes has ring type thing and also, brackets.. Is that what generally
is used? are they strong enough that with them in place and pie in
them, we can screw the connections securely? Only experience can teach
here, so don't want to end up making mistake and hence asking the
pros.. ..


thanks for the answer in advance...


BTW, the 1 inch pipe run in both horizontal (through attic) and
vertical (From attic to the utility room where my appliances are
located)


DJ



oh, i did dirt dip with 4 inches.. would it work?? I live in NJ/NY
area. also, does it need to be done for all appliances. one plumber
friend yesterday told me that only for furnace and gas water heater..
not required for range and the dryer.. I don't mind doing it either
way.. just curious..



The answer is......it depends :-)

Every state has enacted their own rules based on either of the
2 prominent codes. The only way to find out for certain is to
ask the local inspection authority.

There is an interesting discussion he
http://www.hvac-talk.com/vbb/archive...?t-124896.html

Also- Google "Fuel Gas Code"

Jim
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
attaching framing studs to poured concrete keglidd Home Repair 23 May 11th 07 12:05 AM
What Electrical Wiring to Install after Stripping Walls to Studs? Mike Home Repair 19 November 24th 06 01:37 AM
Attach studs to basement wall Platebanger Home Repair 10 February 6th 05 03:53 PM
laminate install question (wall at 45 angle) v.b. Home Repair 3 October 26th 04 02:12 PM


All times are GMT +1. The time now is 02:50 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"