Gyprock ceiling is falling down, due to ground movements; clay soil.
I am informed that the ceiling is attached to beams by studs(?).
Inspecting the roof cavity is difficult as it's a flat fibro roof.
Since the
split in the ceiling is so large, can see, two beams/joists/battons
coming across; not sure whether these are the same timbers that
the gyprock is attached to, as the distance is greater than it should
be(?). Question: how much room is there between timbers coming
across supporting the roof; and those supporting the gyprock ceiling?
Trying to identify timbers that the gyprock should be attached to.
Using a stud(?) detector, not sure what range this has, and what it
is detecting. My only solution thus far is to use 100mm scews
(longest
that can be purchased) and use these to attach to the two timbers
referred to. The two timbers are approx 2inch by 1 inch, they are
approx
3 inches apart and positioned thin edge up.

Any recommendations re. this repair; thanks.

"Joseph Meehan" wrote in message
...
wrote in message
...
Gyprock ceiling is falling down, due to ground movements; clay soil.
I am informed that the ceiling is attached to beams by studs(?).
Inspecting the roof cavity is difficult as it's a flat fibro roof.
Since the
split in the ceiling is so large, can see, two beams/joists/battons
coming across; not sure whether these are the same timbers that
the gyprock is attached to, as the distance is greater than it should
be(?). Question: how much room is there between timbers coming
across supporting the roof; and those supporting the gyprock ceiling?
Trying to identify timbers that the gyprock should be attached to.
Using a stud(?) detector, not sure what range this has, and what it
is detecting. My only solution thus far is to use 100mm scews
(longest
that can be purchased) and use these to attach to the two timbers
referred to. The two timbers are approx 2inch by 1 inch, they are
approx
3 inches apart and positioned thin edge up.

Any recommendations re. this repair; thanks.


I suggest getting a local professional to check out what problems you
are having. That would involve both the ceiling and the foundation. It
would appear you have a serious problem and what you are doing it trying
to fix it with bubble gum. I would start by checking my home owner's
insurance. Hopefully it will be covered.


--
Joseph Meehan

Dia 's Muire duit




I agree you may have more of a problem than just a cracked cieling. Well
ignoring the obvoius stabalize the foundation and frame first comment I
noticed you describe it as 1x2 lumber supporting the cieling. I have never
seen that. In the US common construction practice is 2x6 joists spaced at
16" to 24" depending on roof load. (noticed you use inches and mm in the
same paragraph)

Since you will need to do extensive plaster repair anyway, just use a nail
or small drill to poke holes in a row to locate the wood definately.

wrote in news:39dd9897-1831-47c6-b124-
:

Gyprock ceiling is falling down, due to ground movements; clay soil.
I am informed that the ceiling is attached to beams by studs(?).
Inspecting the roof cavity is difficult as it's a flat fibro roof.
Since the
split in the ceiling is so large, can see, two beams/joists/battons
coming across; not sure whether these are the same timbers that
the gyprock is attached to, as the distance is greater than it should
be(?). Question: how much room is there between timbers coming
across supporting the roof; and those supporting the gyprock ceiling?
Trying to identify timbers that the gyprock should be attached to.
Using a stud(?) detector, not sure what range this has, and what it
is detecting. My only solution thus far is to use 100mm scews
(longest
that can be purchased) and use these to attach to the two timbers
referred to. The two timbers are approx 2inch by 1 inch, they are
approx
3 inches apart and positioned thin edge up.

Any recommendations re. this repair; thanks.




Gee, suddenly things don't look as bad in this HUD Wreck of mine.