Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Return air grille replacement
Hi All,
I have a 14x14 return air grille I want to replace. I got one from Home Depot and while it's the same physical size, the screws are centered in the new one, while the old one it looks like they were made futher out near the edge. I can't use the new one because the screws are in too far - they go through the sheetrock/drywall and hit the outer metal frame of the return. The new grille is mild steel, I assume, and I'm not sure how well drilling holes in the new one to match the old one will work. I'm thinking of getting a 16x16, centering it over the hole and just drilling new holes in the sheetrock. Any Advice would be appreciated. Thanks, Matt |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question on return air grille in basement | Home Repair | |||
How Best to Repaint Metal Return-Air Grille? | Home Repair | |||
Securing HVAC air-return filters to the return plenum | Home Repair | |||
Replacement return air grille | Home Repair | |||
Air conditioner return grille | Home Ownership |