Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
dewalt 12.5" planer problem
Having a problem with my planer. When I try to turn the hangle to
raise or lower my cutting heads, it gets stuck, won't raise past about 1 inch or a little bit more. It will lower, but won't go higher than that. Anybody heard of this and is there an easy fix? Thanks. Jeremy |
#2
Posted to alt.home.repair
|
|||
|
|||
dewalt 12.5" planer problem
wrote: Having a problem with my planer. When I try to turn the hangle to raise or lower my cutting heads, it gets stuck, won't raise past about 1 inch or a little bit more. It will lower, but won't go higher than that. Anybody heard of this and is there an easy fix? Thanks. Jeremy Sounds like the slides are all gooked up with wood resin. Get out the paint thinner for a good claning followed by light application of grease. HTH Joe |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dewalt planer problem | Home Repair | |||
Dewalt planer problem | Woodworking | |||
FA: DeWalt Cordless Tools, DeWalt 8" Radial Arm Saw | Woodworking | |||
Dewalt 735 13" planer | Woodworking | |||
13" planer - delta 22-580 or dewalt DW735?? | Woodworking |