Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1
Default connecting Steel pipe to plastic OR copper

In my downstairs cloakroom I have the mains water coming in and a stop
cock in the room. The piping then runs along the wall and then up and
into the ceiling. It is pretty unsightly and I want to hide it by
chasing it into the wall. The problem is that it is old steel piping
which is not going to be too easy to manipulate.

What i want to do is replace a section of the pipe with plastic or
copper (probably plastic due to the corrosion problems) but how do you
connect steel piping to plastic piping? Is it possible?

I really don't want to replace the entire thing as a quick decoration
of the cloakroom is rapidly turning itno a huge multi-room job!!

Any thoughts?

  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 521
Default connecting Steel pipe to plastic OR copper

On Jun 25, 7:04 am, wrote:
In my downstairs cloakroom I have the mains water coming in and a stop
cock in the room. The piping then runs along the wall and then up and
into the ceiling. It is pretty unsightly and I want to hide it by
chasing it into the wall. The problem is that it is old steel piping
which is not going to be too easy to manipulate.

What i want to do is replace a section of the pipe with plastic or
copper (probably plastic due to the corrosion problems) but how do you
connect steel piping to plastic piping? Is it possible?

I really don't want to replace the entire thing as a quick decoration
of the cloakroom is rapidly turning itno a huge multi-room job!!

Any thoughts?


there are adapters on the shelves at lowe's hardware. there is older
hard cpvc that glues together; now there's some soft new flexible hose
stuff too.
however: once you start opening the old galvanized pipe, you will see
how restricted the water flow is inside and want to replace it.
i did this is to bring the arriving fast water at the basement to the
rest of the slow faucets upstairs. regardless of the expert advice of
others, i use a minimum of 3/4" inside diameter water lines throughout
the home. not 1/2". this will provide improved flow even in a low
water pressure area [like my 42 psi.]
you must have fast water arriving in the main at the basement for all
this to work, of course.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
connecting steel pipe to pvc Bob UK diy 8 January 29th 07 10:25 AM
Connecting from imperial to metric copper pipes ? Clive George UK diy 8 September 22nd 06 09:46 AM
Bending 10mm copper plastic coated pipe Donwill UK diy 0 August 21st 06 12:49 PM
Connecting 32mm waste to 22mm copper Tractorboy UK diy 2 November 1st 05 07:45 PM
connecting aluminum to copper wiring Mr. Bill Home Repair 12 May 5th 04 02:33 PM


All times are GMT +1. The time now is 11:28 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"