What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.

Sasha wrote:
What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.

Your best bet would probably be to strip/sand it down to bare wood and
use a slow-set epoxy (not the 5-minute stuff).

If you don't remove the poly, then it doesn't matter how strong the glue
is since the bond between the poly and the wood is likely to be weaker.

Chris

"Sasha" wrote in message
ps.com...
What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.


30 minute epoxy

"Sasha" wrote in message
ps.com...
What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.


The strongest glue I ran across wasn't used as glue but as a two part enamel
paint for an old fiberglass shower tub refinishing job. I had a drop on a
linoleum floor and it couldn't come off without pulling the linoleum apart.
Two part epoxy couldn't stick to the smooth linoleum surface it and could
have come off easily.

"Sasha" wrote in message
ps.com...
What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.

Either slow-drying two part epoxy, or polyurethane glue, such as Gorilla.
For epoxy, make sure to mix thoroughly, at least a full minute.
Also, I would sand the poly finish off the lower surface before gluing, at
least rough it up.
Roger

On May 18, 12:30 am, "Roger" wrote:
"Sasha" wrote in message

ps.com...

What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.

Either slow-drying two part epoxy, or polyurethane glue, such as Gorilla.
For epoxy, make sure to mix thoroughly, at least a full minute.
Also, I would sand the poly finish off the lower surface before gluing, at
least rough it up.
Roger



- Hide quoted text -

- Show quoted text -

Gorrila glue. HD.

On Thu, 17 May 2007 11:27:40 -0600, Chris Friesen wrote:

Sasha wrote:
What's the strongest glue I can use to glue stained polyurethaned wood
to granite counter top? The gluing surface is small, around 1 sqi.

Your best bet would probably be to strip/sand it down to bare wood and
use a slow-set epoxy (not the 5-minute stuff).

If you don't remove the poly, then it doesn't matter how strong the glue
is since the bond between the poly and the wood is likely to be weaker.

Chris

I'd do slow set epoxy after cleaning off the polyurethane, AND cleaning,
or abrading or roughing up the surface of the granite top as well. You
don't say if it's old or new.

--
Bill
http://www.builderbill-diy-help.com/