Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to alt.home.repair
|
|||
|
|||
![]() Hi! I'm curious if anyone has had similar work done and can share pricing experience on fixing a drainage issue I have in my backyard. And where the folks who do this type of work are listed in the yellow pages. The distance from the low point of my backyard to that 5-foot-deep existing storm sewer basin would involve 150' Manhattan distance of trenching (less if you cut across the front yard diagonally) , and going under a concrete sidewalk and a concrete curb. I'm envisioning a trencher, and a jackhammer might be the toys needed. Maybe a small backhoe depending on how big these basins are. The issue I' trying to solve is that during heavy rains, water will pool in my relatively flat backyard and while it never threatens the house, I'd much rather not have a soggy backyard (and dog) most of the spring. The root cause is that there's only 1.5 feet of drop between my backyard and the storm grate 3 houses down that the water is supposed to go to, and settling has occurred over the years. I can't simply build up my yard without making the upstream neighbor's problem even worse (it's possible I can get this upstream neighbor to go in on the cost since it will benefit them as well). I've talked to the city engineer, and they've said that private property standing water issues are outside their purview, but they reviewed the grading and drainage plan of my home's subdivision and indicated that I could have a private catch basin installed in my back yard and for about $200 total in permit fees, tie into the city storm sewer basin that exists at the front of my house ($100 for the tie in permit, $50 permit to bust up the curb, and $50 permit to bust up a sidewalk square). I know I can't fit it in the budget in the coming couple of months, so I'd hate to waste a contractor's time to come out and quote, but just want to get a feel for what it might cost so I can start saving, or decide to live with the water. Thanks for any shared experience or advice on this! Jim |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Using the Sewer Vent for Cable or Cat5e Run? | Home Repair | |||
DIY project: run 110 vac to tree in front yard? | Home Repair | |||
Adding a basin to a toilet with no route for basin waste pipe | UK diy | |||
Adding a run capacitor | Metalworking |