Hi
I work as a manager in a 14 condo project in mexico.
It is REALLY hard to get good maintenance down here so i guess this is
the first of may inquiries...
we have wired the whole place with a cable number 8 and were now told
that we need to change the cable in the whole building!! that is a very
big expenss.
I was wondering if anyone can help me calculate how big a charge can a
cable take? and for how long?
I figure that is the only way to find out if im being fooled or not!
thank you

Since you ask su pregunta en Inglès, yo creo que quiere una respuesta
Americana.
In the U.S. a number 8 conductor is good for 40-50 amps depending upon
temperature rating






wrote in message
oups.com...
Hi
I work as a manager in a 14 condo project in mexico.
It is REALLY hard to get good maintenance down here so i guess this is
the first of may inquiries...
we have wired the whole place with a cable number 8 and were now told
that we need to change the cable in the whole building!! that is a very
big expenss.
I was wondering if anyone can help me calculate how big a charge can a
cable take? and for how long?
I figure that is the only way to find out if im being fooled or not!
thank you

wrote:
Hi
I work as a manager in a 14 condo project in mexico.
It is REALLY hard to get good maintenance down here so i guess this is
the first of may inquiries...
we have wired the whole place with a cable number 8 and were now told
that we need to change the cable in the whole building!! that is a very
big expenss.
I was wondering if anyone can help me calculate how big a charge can a
cable take? and for how long?
I figure that is the only way to find out if im being fooled or not!
thank you

mexicoians are all frauds so gte help

Yes, #8 wire is rated for 40-50 Amps(actually 55 depending on the wire
type). This is from table 310.16, the 2005 National Electric Code for
the U.S. However, it completely depends how the original electrician
wired the building. Also, is the wire copper OR aluminum? If it's
aluminum, it will carry less amps. Will people be living full time in
the condos? Will they be cooking, using a washing machine, dishwasher,
hot water heater, individual air conditioning unit?

Is the number 8 wire running to supply each condo? Did anyone
calculate the load for each unit? I would think you need 75 to 100 Amp
service per unit. If each unit needs 75 amps, you probably need number
4 wire (copper) running to them. If 100 amps, number 3 wire. So, yes,
somebody may have made un gran error! But, it all depends.

And after that the wiring in the units to receptacles, etcetera is 14,
12, or 10?

Bottom line: Get a real electrician to help you before somebody gets
hurt!

On 14 Nov 2006 13:49:15 -0800, "an_old_friend"
wrote:



id theft is still acrime
http://kb9rqz.blogspot.com/

--
Posted via a free Usenet account from http://www.teranews.com

calculating the cost of the electrician rate and materials can best be
done locally. perhaps you can consult your local electrical supply
wholesaler or building permit office for best information on this after
you consult the power company to have them look at your service meter,
entrance cables, and panels.
faq:
http://www.landfield.com/faqs/electrical-wiring/part1/


wrote:
Hi
I work as a manager in a 14 condo project in mexico.
It is REALLY hard to get good maintenance down here so i guess this is
the first of may inquiries...
we have wired the whole place with a cable number 8 and were now told
that we need to change the cable in the whole building!! that is a very
big expenss.
I was wondering if anyone can help me calculate how big a charge can a
cable take? and for how long?
I figure that is the only way to find out if im being fooled or not!
thank you