Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
OK, this is a silly question but . . . I've only seen electric powered
tools up close. I have been tempted to buy gasoline powered tools but I have always wondered -- how to do you get and store the gasoline for them? |
#2
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
Inquiringmind wrote: OK, this is a silly question but . . . I've only seen electric powered tools up close. I have been tempted to buy gasoline powered tools but I have always wondered -- how to do you get and store the gasoline for them? you get a little plastic gas can from almost any department store auto section , or hardware store. fill it at your local gas station. If it needs two-stroke then you have to add the right amount of two-stroke oil to the gas can. storing it safely might be a problem if you live in an apartment. Mine is stored in an outside shed with the tools that use it . |
#3
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
"Inquiringmind" wrote in message oups.com... OK, this is a silly question but . . . I've only seen electric powered tools up close. I have been tempted to buy gasoline powered tools but I have always wondered -- how to do you get and store the gasoline for them? I used to have several gasoline powered tools (when I had a big lot which included a storage shed separated from my house). Now, I am in the situation where integral garage storage is all that is available and that's not a good place for gasoline, propane tanks, and other accelerants/explosives. Storage of accelerants/explosives is a serious issue that many have ignored and have been subsequently toasted. Or, they survived and found that insurance did not apply due to mal-storage issues! |
#4
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
Inquiringmind wrote: OK, this is a silly question but . . . I've only seen electric powered tools up close. I have been tempted to buy gasoline powered tools but I have always wondered -- how to do you get and store the gasoline for them? The thing about the small fuel cans (5 gal or smaller) is that they always seem to leak a little, which is annoying. You get fuel on your hands which also sucks. The way they can fly around in the back of the pickup or car is a bit dicey too. The better hardware stores (Ace) will stock replacement caps and gaskets so replace them if they leak. I also use ratcheting load bars to secure mine. Some folk have a larger tank in a pickup truck with either a 12v or manual pump. You see them all the time. Some are as small as 20 gallons. I hate hauling diesel back and forth and have seriously considered one of these larger tanks. The problem is that I have two pickups and don't always use the same truck to transport fuel. |
#5
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
Inquiringmind wrote: OK, this is a silly question but . . . I've only seen electric powered tools up close. I have been tempted to buy gasoline powered tools but I have always wondered -- how to do you get and store the gasoline for them? Not a silly question at all. Pity it has received some silly answers. These two links should get you started on the basics: http://www.mapllc.com/safety/api_gasoline_safety.html http://www.cdc.gov/niosh/topics/co/ Cheers |
#6
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
Thanks very much! |
#7
Posted to alt.home.repair
|
|||
|
|||
Gasoline powered tools?
Inquiringmind wrote: Thanks very much! You are quite welcome. Have fun with your gas powered tools. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
suitable sticky flammable fluids? | Metalworking | |||
FAQ: HAND TOOLS (Repost) | Woodworking | |||
Craftsman Turning Tools | Woodturning | |||
Power tools in Europe (long) | Woodworking | |||
Bobcat or other gasoline powered welder? | Metalworking |