Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
another Metal Roof Question....
I have a small (18' x 24') mountian cabin with an alum. Metal roof.
This has begun to leak, and I'm destined, next week , to go and re-pound the nails, and replace the loose ones with roofing screews/washers. What I am curious about is where in the roofing should the nails be located?? The roofing has roughly the following profile -----------/\---/\------------/\---/\------ with a set of 'peaks' about 2 " from the edge. It would seem to make sence to nail in the valley between peaks, but I have know clue, if that is correct... Any Ideas???? Thanks for your time... Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Roofing question - How many downspouts do I need for a given area of roof? | Home Repair | |||
Cedar Shingle roof question | Home Repair | |||
pros and cons of metal roof | Home Ownership | |||
Metal roof covered in rust | Home Repair | |||
Pitch and gravel roof? | Home Repair |