Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
Martin
 
Posts: n/a
Default Dishwasher spray tower sticking

We have a GE Model GSD680X dishwasher, about 6-7 years old. The telescoping
tower that pops up when washing hasn't been retracting all the way when the
wash is finished, and then we can't get the rack out. It can be pushed back
down, but it can be very difficult to reach when the rack has been fully
loaded. It does go down easily when you do get to it, so I'm wondering if
the problem is dirt getting in-between the telescoping sections.

Is there a way to get this thing apart, without wrecking it, so it can be
cleaned out, or to find out what else might be making it stick.? Any
suggestions will be appreciated.


  #2   Report Post  
Posted to alt.home.repair
 
Posts: n/a
Default Dishwasher spray tower sticking

If you search for appliance parts, there are many sites that have
exploded parts diagrams by model. Then you can figure out what the
parts are and how it comes apart. It's possible it has some debris
lodged in it, or it could be worn out.

  #3   Report Post  
Posted to alt.home.repair
 
Posts: n/a
Default Dishwasher spray tower sticking

It probably need taken apart and cleaned. You'd be surprised how much
gunk can accumalate in one of those things. Also when you get into it
think just how sanitary is it? But what people don't see don't hurt
they say!!!!!!!!!
tinacci

  #4   Report Post  
Posted to alt.home.repair
U. R. Hosed
 
Posts: n/a
Default Dishwasher spray tower sticking

"Martin" wrote in message
. ..
We have a GE Model GSD680X dishwasher, about 6-7 years old. The
telescoping tower that pops up when washing hasn't been retracting all the
way when the wash is finished, and then we can't get the rack out. It can
be pushed back down, but it can be very difficult to reach when the rack
has been fully loaded. It does go down easily when you do get to it, so
I'm wondering if the problem is dirt getting in-between the telescoping
sections.

Is there a way to get this thing apart, without wrecking it, so it can be
cleaned out, or to find out what else might be making it stick.? Any
suggestions will be appreciated.


As others have mentioned, a good cleaning of that part certainly seems to be
in order. After that, I can wholeheartedly recommend a wonderful product
that will help to keep it clean, a product called "Dishwasher Magic." You
can see more on it he

http://repair2000.com/magic.html

Good luck, and happy washing!

U.R. Hosed


*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
  #5   Report Post  
Posted to alt.home.repair
Shaun Eli
 
Posts: n/a
Default Dishwasher spray tower sticking

Whirlpool recommends the following:

Fill a two cup measuring cup with vinegar and put it (face up,
obviously, so it doesn't spill) on the lower rack.

Run the dishwasher on the normal cycle, air dry, with no dishes and no
detergent.

The vinegar helps clean out the gunk-- and the water dripping into the
cup will overflow and thus slowly release the vinegar into the
dishwasher.

They say don't do this too often (no more than a couple of times a
year) because the vinegar is a bit caustic for the components.

I did this and it helped a lot.

Shaun Eli
www.BrainChampagne.com
Brain Champagne: Clever Comedy for Smart Minds (sm)
Now with a comedy video on the website (no foul language, no adult
topics)

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Patching a hole in a plastic dishwasher spray arm Abe Home Repair 10 October 10th 05 05:23 AM
connecting water supply to new dishwasher Bill Home Repair 4 August 3rd 05 02:23 AM
Frigidaire dishwasher spray arms not alternating [email protected] Home Repair 0 July 30th 05 09:58 PM
GE Dishwasher Spray Arm base replacement D. E. Smith Electronics Repair 1 April 18th 04 07:49 AM
Teka Dishwasher sticking on programs Scumbag Adie UK diy 3 January 28th 04 06:54 AM


All times are GMT +1. The time now is 04:02 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"