Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
hank
 
Posts: n/a
Default Ok to lay a gas stove on it's back?


I might need to do this to unload a gas stove. I didn't know if there was
anything prohibitive about laying one on its back for a short time. Seems
as long as the loose pieces are removed (burner grates, stove top and oven
racks) then it should be ok.


  #2   Report Post  
Posted to alt.home.repair
blue
 
Posts: n/a
Default Ok to lay a gas stove on it's back?

Hi hank Yes it's Ok to lay it on its back but get it install by
licenced tradesman.
regards Blue

  #3   Report Post  
Posted to alt.home.repair
hank
 
Posts: n/a
Default Ok to lay a gas stove on it's back?


"blue" wrote in message
oups.com...
Hi hank Yes it's Ok to lay it on its back but get it install by
licenced tradesman.
regards Blue



Thanks Blue. May I ask why you say to have it installed professionally?
I'll just be putting the new one in where the old one was. I thought it
would be just a matter of turning off the gas valve as it comes out of the
wall.


  #4   Report Post  
Posted to alt.home.repair
mm
 
Posts: n/a
Default Ok to lay a gas stove on it's back?

On Tue, 14 Mar 2006 06:25:24 GMT, "hank" wrote:


I might need to do this to unload a gas stove. I didn't know if there was
anything prohibitive about laying one on its back for a short time. Seems
as long as the loose pieces are removed (burner grates, stove top and oven
racks) then it should be ok.

If it is the back and not the front, I doubt you have to remove the
oven racks. Also, you can probably tape, with good tape, the stove
top. Removing it is difficult because it is attached in the back in
most or all cases. It hinges up for access but even in the old days I
don't think it was easy to take off. You can try, but bring some tape
with you.

OTOH, afaik it's not enough to take off the burner grates. Admittedly
the last gas stove I had would be40 years old now, but I don't think
they've changed, and you might not realize how easy the entire burners
come off. Just lift the round part where the pot goes. (I don't think
sparker ignitors make this any harder, but I haven't tried one.) They
go back on easily too, but you should keep track of which was which.
There are definitely differences in all 4 I think. And there may be
some loose little parts around the pilot(s). Maybe not in most cases,
but I have a vagure recollection that I had that once. Of course
most pilots aren't the same anymore as mine was, but I would look
around.

  #5   Report Post  
Posted to alt.home.repair
Seth Goodman
 
Posts: n/a
Default Ok to lay a gas stove on it's back?

In article , on Tue, 14
Mar 2006 07:48:04 GMT, hank wrote:


"blue" wrote in message
oups.com...
Hi hank Yes it's Ok to lay it on its back but get it install by
licenced tradesman.
regards Blue



Thanks Blue. May I ask why you say to have it installed professionally?
I'll just be putting the new one in where the old one was. I thought it
would be just a matter of turning off the gas valve as it comes out of the
wall.



First, you can't count on the gas piping lining up exactly between the
new and the old stove. Frequently, some pipe has to be added,
subtracted, or moved.

Second, it may be illegal in your area to install a gas stove yourself.
It certainly is illegal here in Massachusetts. In MA, a gas stove (or
any other gas appliance) must be installed by a licensed gas fitter. A
permit must be pulled, and the installation is inspected afterwards.


--
Seth Goodman
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chantecler Windows and Doors Brian White Home Repair 3 June 6th 16 11:22 PM
Gas stove piping requirements Sacramento Dave Home Repair 3 July 26th 05 11:39 AM
Kelvinator Stove , wire came off wryq Home Repair 3 April 28th 05 03:23 AM
Gunner: I'm back Gunner Metalworking 388 July 9th 04 12:35 AM
Since I don't have any plans...whatsa best way to secure desk's back panel to side panels? (and other questions) Leon Woodworking 5 August 27th 03 04:08 AM


All times are GMT +1. The time now is 01:07 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"