I closed on my newly built house last Jan. The warranty has now
expired, and conveniently enough, there are vertical cracks in the
grout of my stand up shower.

I spoke with someone at Lowes about it (he said he had built new homes
up north for a while before coming to Florida). He asked how the tile
was laid - ie, was it laid over standard sheetrock, or did they use
cement backerboard.

I really was not sure, to be honest - however it seems that it may be
laid over general sheetrock. He said that if the shower was tiled over
standard sheetrock that the sheetrock may deteriorate quickly over
time, resulting in a lot of expensive damage.

Considering that the wall does not sound very dense when you knock on
it, I am wondering if the builder cheaped out and just used standard
sheetrock.

Is there any sort of building code that requires the use of concrete
backerboard for new constructions (in the bath areas)??

I am really worried now, as I know that the grout already has to be
redone in those areas, but I really didn't want to worry about this
other crap now.

Does anyone have any knowledge of this?? By the way, I'm located in
Orlando Florida.

wrote in message
oups.com...
I closed on my newly built house last Jan. The warranty has now
expired, and conveniently enough, there are vertical cracks in the
grout of my stand up shower.

I spoke with someone at Lowes about it (he said he had built new homes
up north for a while before coming to Florida). He asked how the tile
was laid - ie, was it laid over standard sheetrock, or did they use
cement backerboard.

I really was not sure, to be honest - however it seems that it may be
laid over general sheetrock. He said that if the shower was tiled over
standard sheetrock that the sheetrock may deteriorate quickly over
time, resulting in a lot of expensive damage.

Considering that the wall does not sound very dense when you knock on
it, I am wondering if the builder cheaped out and just used standard
sheetrock.

Is there any sort of building code that requires the use of concrete
backerboard for new constructions (in the bath areas)??

I am really worried now, as I know that the grout already has to be
redone in those areas, but I really didn't want to worry about this
other crap now.

Does anyone have any knowledge of this?? By the way, I'm located in
Orlando Florida.

Local building officials would know for sure.

Where I live bathrooms are done in green (water resistant) wall board. That
is MININIUM code. Tile can be installed over the green board.
You have more problems than the drywall here. If the cracks are in the tile,
grout joints then either the structure is shifting, or the installation of
the tile was sub-standard.

when you call the building permit office, you must ask in what year of
construction if you are asking about previous work, and what is
required in today's construction for your repair permit.
due to climates and so many types of building construction the answer
you seek will be a local one.
northern mistakes made in the south:
http://www.buildingscience.com/topten/south.htm
background reading for various climate construction at:
http://www.buildingscience.com/desig...rk/default.htm

and more at:
http://www.buildingscience.com/resources/homeowner.htm

wrote in message
oups.com...
I closed on my newly built house last Jan. The warranty has now
expired, and conveniently enough, there are vertical cracks in the
grout of my stand up shower.

I spoke with someone at Lowes about it (he said he had built new homes
up north for a while before coming to Florida). He asked how the tile
was laid - ie, was it laid over standard sheetrock, or did they use
cement backerboard.

I really was not sure, to be honest - however it seems that it may be
laid over general sheetrock. He said that if the shower was tiled over
standard sheetrock that the sheetrock may deteriorate quickly over
time, resulting in a lot of expensive damage.

Considering that the wall does not sound very dense when you knock on
it, I am wondering if the builder cheaped out and just used standard
sheetrock.

Is there any sort of building code that requires the use of concrete
backerboard for new constructions (in the bath areas)??

I am really worried now, as I know that the grout already has to be
redone in those areas, but I really didn't want to worry about this
other crap now.

Does anyone have any knowledge of this?? By the way, I'm located in
Orlando Florida.

Take a drill with a 1/8" bit in it. Drill a small hole about 18" up from the
floor on the wall *behind* the shower stall. Take a coat hanger (wire) and
straighten it out. Use the wire to poke through the hole to test the
material. It will "clunk" against cement board and will not penetrate it. It
will "thud" against drywall/greenboard, and you will be able to push it into
the board. Now you know. Patch the small hole with Spackle and patch-paint
the wall. (Because it is low on the wall it will be less noticeable).

Take off the shower valve and cover plate and you'll see
the backerboard where they cut the tile in a circle under
the cover plate. Your house is so new it will all come
apart easily.

thetiler

Thanks for the replies - I am going to check this tonight....