Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
well pump replacement
I am looking for any general tips of info in replacing an existing (15+ yr
old) Flint and Walling (F&W) 1.5hp well pump the well and pump is only for sprinkler water am I correct in thinking that I should be able to just purchase a new motor and leave all other parts untouched, especially since they still work fine? is the "motor only" replacement harder than a pool pump "motor only" replacement? reason am thinking it's time for the replacement is that on a few occasions, when pump is started, it causes a white smoke coming from motor (I normally shut it off for a few minutes) but I suspect that may have to do with the priming as it then runs normally once the water level is up at ground level |
#2
Posted to alt.home.repair
|
|||
|
|||
well pump replacement
Generally when the pump is getting ready to go you will know it by the
sound that it makes (bad bearings etc). white smoke may indicate an electrical problem. you might want to have someone from a pump company come out and take a look at it before spending the bucks on a new pump motor. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
heat pump replacement | Home Repair | |||
OT-Shriners Raffle. Of interest | Metalworking | |||
Central heating pump help please | UK diy | |||
Submersible Pump Overloading in Cold Weather | Electronics Repair | |||
Does this seem like a fair price for a heat pump replacement? | Home Repair |