Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Kenmore Dryer exhaust pipe
I'm hooking up my parents electric dryer and the exhaust pipe from this
Whirlpool manufactured unit only sticks out half an inch tops. I remember having a Whirlpool dryer 25 years ago and it had the same stupid design making it almost impossible to securly put the duct work on it and clamp it down tightly. My Maytag gas dryer has at least an inch or 2 sticking out which makes sense. Any idea why Whirlpool did it this may? When I had the problem 25 years ago, I took off the back and fed the ductwork thru and attached the clamp and put the back back on. A pain in the rear for a stupid design. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kenmore dryer door cracks open and shuts off | Home Repair | |||
Kenmore dryer timer doesn't advance | Home Repair | |||
Dryer too hot in back | Home Repair | |||
distance btw dryer exhaust and AC compressor | Home Repair | |||
dryer vent overlapping black pipe gas | Home Repair |