Home |
Search |
Today's Posts |
#1
Posted to misc.consumers.house
|
|||
|
|||
new American Standard Cadet isn't flushing well
We've got two American Standard Cadet toilets. We bought the first
about 2 years ago and are still very pleased with its performance. The second one was bought about 3 months ago on the strength of the first one's good work at removing waste, but it is not working nearly as well. The flapper seems to be closing too soon, not allowing enough water to take away the waste. I have checked to see whether the bowl is level longitudinally and latitudinally, and it is. I've also adjusted the float on the flapper chain both up and down, and there is no improvement whatsoever. The float on the filler tube is also adjusted correctly to provide enough water for a flush. The only thing that works is to hold the flush lever until the waste exits the bowl. But this should not be necessary: what other solutions can I try? Is this problem possibly related to old plumbing? We have a sink in the same bathroom that also doesn't drain well, and I know I need to get the plumber in to ream the wastepipe for that. Could there be a connection? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Origin of Hex Head Nuts/bolts? | Metalworking | |||
Revocation of American Independence | Metalworking | |||
Determining Geologic Sources of Native American Copper | Metalworking | |||
SDS drill with standard chuck | UK diy | |||
Porter Cable 690 router mounted to TS extension, do I use plunge base or standard | Woodworking |