Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
CD spindle motors (Mabuchi)
I need OEM part #'s for Mabuchi 5.9v DC motor generic # RF-300S-12350:
shaft length=12 mm/0.47" (a longer length is fine as I can cut it) motor height=12mm/0.47" motor diameter=24mm/0/94" as this is a spindle motor out of a JVC dvd player model:XV-523GD,year:2001 and JVC lists it as an assembly with the spindle disc which has a reel counter underneath it and the plastic housing with a photo-interrupter but JVC wants $52 for the whole thing as the motor is not sold separately, I tried lubing it and running it on my power supply at a slightly higher voltage but it still has bad spots. I can replace the motor alone I just need OEM part #'s for it as PRB Belt co and other electronic parts suppliers list the bigger standard sized RF-310T-XXXX series motors but not this smaller one. For your info the JVC spindle motor assembly part # is: JVC old # VDG1099001TSVME JVC new # FXL-V6SPSV-2C I can measure the spindle disc height of old motor prior to replacing. Thanks in advance for help/replies. Sidney Dartmouth, Nova Scotia Canada |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Coill winding / AC motor construction - book recommendation ? | Electronics Repair | |||
Repair data base | Electronics Repair | |||
Kelton Balancer Review Draft--long | Woodturning | |||
Spindle wobble... | Metalworking | |||
Curious micrometer design | Metalworking |