You are best to find an old scrapper player like the one you have, and take
a chance of the motor is okay. I have had these go defective before.
Sometimes the one from the scrapper is also bad.
--
Jerry G.
======
"Sidney" wrote in message
om...
I need OEM part #'s for Mabuchi 5.9v DC motor generic # RF-300S-12350:
shaft length=12 mm/0.47" (a longer length is fine as I can cut it)
motor height=12mm/0.47"
motor diameter=24mm/0/94"
as this is a spindle motor out of a JVC dvd player
model:XV-523GD,year:2001 and JVC lists it as an assembly with the
spindle disc which has a reel counter underneath it and the plastic
housing with a photo-interrupter but JVC wants $52 for the whole thing
as the motor is not sold separately, I tried lubing it and running it
on my power supply at a slightly higher voltage but it still has bad
spots.
I can replace the motor alone I just need OEM part #'s for it as PRB
Belt co and other electronic parts suppliers list the bigger standard
sized RF-310T-XXXX series motors but not this smaller one. For your
info the JVC spindle motor assembly part # is:
JVC old # VDG1099001TSVME
JVC new # FXL-V6SPSV-2C
I can measure the spindle disc height of old motor prior to replacing.
Thanks in advance for help/replies.
Sidney
Dartmouth, Nova Scotia
Canada
|