Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Unit responds to remote and turns on power LED.
It was having problems losing HV to CRTs intermittently; hitting the chassis would make HV go on and off, but left sound on. Tapped on the multiplier then was OK for a while, suspecting bad solder joint on near multiplier resoldered suspect solder joints. Now no HV or sound. Inspected work for shrts etc. but all looks good. Any experience with this type problem? TIA Charles |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
High Voltage DC | Electronics | |||
Simple question regarding Ceiling tiles and sound? | UK diy | |||
voltage regulator that drops out of circuit | Electronics | |||
OT : high voltage coils | Metalworking | |||
21" monitor with FIMI chassis C2182DAS and High Voltage failure | Electronics Repair |