Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Looking for replacement clock LCD
I'm trying to find a replacement LCD for a Toro Vision 2 irrigation
controller. I tried to purchase one through Toro, but they won't sell it to me. It appears to be a fairly generic clock display. It has 4 full digits w/ colon in the middle, AM and PM to the right of the digits, and along the bottom are the days. It has legs attached to it, 12 along the top and 12 along the bottom at 0.1 inch separation. It appears that the first, 6th, 7th, and 12th pins in each row serve no electrical function, as they're cut shorter than the others and do not contact the PCB. The only writing on this LCD is the number 2391 on the back. Here's an attempt to draw the display (it looks reasonably correct if all the characters are the same width): o o o o o o o o o o o o ------------------------------- | | | #### #### #### #### | | # # # # # # # # # AM | | #### #### #### #### | | # # # # # # # # # PM | | #### #### #### #### | | | | SUN MON TUE WED THU FRI SAT | ------------------------------- o o o o o o o o o o o o Any help would be greatly appreciated! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
AA battery clock conundrum | Electronics Repair | |||
fixeda Antique mantle clock | Metalworking | |||
Replacement for Sangamo clock | UK diy | |||
Oven, Oven Clock stopped working | Home Repair |