Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
HELP! Can't figure out TV/VCR Problems!!!!!
We've got a problem with our VCR that is about to drive us nutty! Our
motorhome has a TV/VCR compartment forward over the driver/passenger seats. Cabinet is metal and you can see a jumble of TV cables and other wires that appear to go to exterior lights. The TV, Amplified antenna & VCR wires are all connect3d to a little black box (Magnadyne); Power is from an inverter which we installed. The TV works fine but the VCR has really annoying interference in the way of wide rolling lines (composed of colored dots or thingies that look like a line up of golf tees). When you take the VCR out of the cabinet, it works fine. We've tried exchanging the VCR for another and it still gets interferrence. We've tried expensive shielded cables and it didn't help at all. We'd really, REALLY appreciate any suggestions as to what the problem is and how we can fix it. We've been pretending to fix it for over a week now and my husband is about to drill holes in the dash and install the VCR there (and have cables dangling from the dash to the overhead). Can you help!!!!!!!!!!? Thanks! Sandy |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problems sharpening chisels | UK diy | |||
Gateway EV700 problems | Electronics Repair | |||
Honeywell 3 port mid position valve - problems with... | UK diy | |||
Magnavox rear projection TV RK8530AK02 - startup problems | Electronics Repair | |||
Zenith TV problems | Electronics Repair |