Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Tony Marsillo
 
Posts: n/a
Default CATV Converter General Instruments CFT2254/0800

My cable company has switched to new boxes, Scientific Atlanta, and have
told us to remove the old boxes, GI CFT2254/0800. We were told to throw out
the old boxes. I would like to use them as a tuner, I am not interested in
the decoder section. Is this possible?

It seems a shame to throw these out. They are full featured converters with
volume control, audio/video output and remote control. Any ideas?

Thanks
--
Tony Marsillo
Nutmeg Repair
-----------------------------------------------------------------


  #2   Report Post  
NSM
 
Posts: n/a
Default


"Tony Marsillo" wrote in message
...
| My cable company has switched to new boxes, Scientific Atlanta, and have
| told us to remove the old boxes, GI CFT2254/0800. We were told to throw
out
| the old boxes. I would like to use them as a tuner, I am not interested in
| the decoder section. Is this possible?
|
| It seems a shame to throw these out. They are full featured converters
with
| volume control, audio/video output and remote control. Any ideas?

Do they have any raw video/audio output connections?

N


  #3   Report Post  
Tony Marsillo
 
Posts: n/a
Default

They have audio and video outputs. What do you mean by "raw"?

--
Tony Marsillo
Nutmeg Repair
-----------------------------------------------------------------
"NSM" wrote in message
news:GP16d.122338$KU5.19681@edtnps89...

"Tony Marsillo" wrote in message
...
| My cable company has switched to new boxes, Scientific Atlanta, and have
| told us to remove the old boxes, GI CFT2254/0800. We were told to throw
out
| the old boxes. I would like to use them as a tuner, I am not interested
in
| the decoder section. Is this possible?
|
| It seems a shame to throw these out. They are full featured converters
with
| volume control, audio/video output and remote control. Any ideas?

Do they have any raw video/audio output connections?

N




  #4   Report Post  
NSM
 
Posts: n/a
Default


"NSM" wrote in message
news:GP16d.122338$KU5.19681@edtnps89...
|
| "Tony Marsillo" wrote in message
| ...
| | My cable company has switched to new boxes, Scientific Atlanta, and have
| | told us to remove the old boxes, GI CFT2254/0800. We were told to throw
| out
| | the old boxes. I would like to use them as a tuner, I am not interested
in
| | the decoder section. Is this possible?
| |
| | It seems a shame to throw these out. They are full featured converters
| with
| | volume control, audio/video output and remote control. Any ideas?
|
| Do they have any raw video/audio output connections?

Some models let you take off the signals before the decoder. Others work
fine with regular cable signals as is.

N


  #5   Report Post  
Andy Cuffe
 
Posts: n/a
Default

On Mon, 27 Sep 2004 19:52:54 -0400, "Tony Marsillo"
wrote:

My cable company has switched to new boxes, Scientific Atlanta, and have
told us to remove the old boxes, GI CFT2254/0800. We were told to throw out
the old boxes. I would like to use them as a tuner, I am not interested in
the decoder section. Is this possible?

It seems a shame to throw these out. They are full featured converters with
volume control, audio/video output and remote control. Any ideas?

Thanks



These are controlled by the cable company and will stop working after
not receiving their control signal for a certain amount of time.
There are devices you can install to activate these boxes. They
basically simulate the cable company's control signal and keep the box
active. These are sold for the purpose of stealing pay channels, so
you should only do this if there will no longer be any analog pay
channels on your cable system. Unfortunately, there's no other way to
make the box work.
Andy Cuffe



  #6   Report Post  
Jerry G.
 
Posts: n/a
Default

Most of these types of boxes must be kept activated by the cable company to
continue to work even as a simple tuner. This depends on the design. If you
call the tech department of your cable company, I am sure that they can
answer this for you. Tell them you want to know if the box would work as a
simple converter for an older TV, if you keep it.

The cable company in the area where I live did the same thing.
Unfortunately, their boxes were no longer working once they discontinued
their service. In the end, their boxes were as good as a 5 lbs boat anchor.

--

Jerry G.
==========================


"Tony Marsillo" wrote in message
...
My cable company has switched to new boxes, Scientific Atlanta, and have
told us to remove the old boxes, GI CFT2254/0800. We were told to throw out
the old boxes. I would like to use them as a tuner, I am not interested in
the decoder section. Is this possible?

It seems a shame to throw these out. They are full featured converters with
volume control, audio/video output and remote control. Any ideas?

Thanks
--
Tony Marsillo
Nutmeg Repair
-----------------------------------------------------------------



  #7   Report Post  
Art
 
Posts: n/a
Default

Amazing they did find a large gathering on E_Bay though?? Nuf said on that
end.
"Tony Marsillo" wrote in message
...
My cable company has switched to new boxes, Scientific Atlanta, and have
told us to remove the old boxes, GI CFT2254/0800. We were told to throw
out the old boxes. I would like to use them as a tuner, I am not
interested in the decoder section. Is this possible?

It seems a shame to throw these out. They are full featured converters
with volume control, audio/video output and remote control. Any ideas?

Thanks
--
Tony Marsillo
Nutmeg Repair
-----------------------------------------------------------------




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GE HTS22GBMARWW Digital Controls refrig 22 cu ft.....main bord failure number #3! henrib7 Home Repair 7 June 13th 04 09:30 AM
Help with General products GBsCards Woodworking 5 February 19th 04 12:34 AM
General stuff on phase converters Bob Swinney Metalworking 2 November 25th 03 07:51 PM
Phase converter balancing Karl Townsend Metalworking 7 July 13th 03 12:48 AM


All times are GMT +1. The time now is 08:23 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"