Hi....
Is there someone that know where I can get a SEVICE MANUAL for a HAMEG HM1508-2?
I have search the net, but all I can find is an OPERATING MANUAL for HM1508-2. But where can I find a SM?
Anyone know, where I should look?

Best regards from SWEDEN
Bo-Lennart Karlsson
Falun, SWEDEN

https://elektrotanya.com/hameg_hm150.../download.html

The internet is your friend.

Peter Wieck
Melrose Park, PA

lördag 13 februari 2021 kl. 20:53:42 UTC+1 skrev Peter W.:
https://elektrotanya.com/hameg_hm150.../download.html

The internet is your friend.

Peter Wieck
Melrose Park, PA
Thanks Peter....
I've already downloaded that manual. But that's not a SERVICE-MANUAL. It's an OPERATING-MANUAL
There is lots of places on the net where You can get OPERATING-MANUAL for this HAMEG-oscilloscope, but I can't find a site that has a SERVICE-MANUAL.
So I have to look further.
Thanks anyway.

Bo-Lennart Karlsson
Falun, SWEDEN

On 13/02/2021 14:29, Bo-Lennart wrote:
Hi....
Is there someone that know where I can get a SEVICE MANUAL for a HAMEG HM1508-2?
I have search the net, but all I can find is an OPERATING MANUAL for HM1508-2. But where can I find a SM?
Anyone know, where I should look?

use the word 'schematic' in your searches.

https://www.eevblog.com/forum/repair...1507-3-repair/

has links to the SMPS and CRT schematics, which could be similar from
reading through this

https://www.mikrocontroller.net/topic/444998

--
Adrian C

Bo-Lennart wrote:
==============

lördag 13 februari 2021 kl. 20:53:42 UTC+1 skrev Peter W.:
https://elektrotanya.com/hameg_hm150.../download.html

The internet is your friend.

---------------------------------------------------------------------------
I've already downloaded that manual. But that's not a SERVICE-MANUAL. It's an OPERATING-MANUAL

** ROTFL !!

Peter ****** is a truly * inexhaustible * source of misinformation.

If stupid, wrong info were actual energy - all our AGW problems over due to just one idiot.



..... Phil

söndag 14 februari 2021 kl. 11:57:23 UTC+1 skrev Adrian Caspersz:
On 13/02/2021 14:29, Bo-Lennart wrote:
Hi....
Is there someone that know where I can get a SEVICE MANUAL for a HAMEG HM1508-2?
I have search the net, but all I can find is an OPERATING MANUAL for HM1508-2. But where can I find a SM?
Anyone know, where I should look?
use the word 'schematic' in your searches.

https://www.eevblog.com/forum/repair...1507-3-repair/

has links to the SMPS and CRT schematics, which could be similar from
reading through this

https://www.mikrocontroller.net/topic/444998

--
Adrian C
Hi Adrian....
Thanks for replying on my request.
Yes, I have used "schematic" in my search also, but without any luck.
To be honest, I don't have that scope in my hand yet. I friend of my, living far away from me, told me over the phone that he want me to look to this "death" scope. So I like to be prepared when the scope comes into my hand. A death scope can be anything. It could be anything easy or vice versa, right?

OK, Adrian thanks for Your reply.

Bo-Lennart Karlsson
Falun, SWEDEN

Off your meds again, Drongo?

Were the OP to put *Service Manual* into that link, it would come up. At least it did for me.

Peter Wieck
Melrose Park, PA

Peter ****** is a MORON.

=======================

Were the OP to put *Service Manual* into that link, it would come up.


** **** off you tenthwit Google monkey.

BEWARE - of all ham radio guys.


...... Phil

On 14/02/2021 11:19, Bo-Lennart wrote:
I friend of my, living far away from me, told me over the phone that he
want me to look to this "death" scope. So I like to be prepared when the
scope comes into my hand.

"Death" scope does not sound so inviting.

When you turn it on, make sure you are wearing rubber boots, gloves and
you are standing on a good rubber mat!

--
Adrian C

söndag 14 februari 2021 kl. 21:13:28 UTC+1 skrev Adrian Caspersz:
On 14/02/2021 11:19, Bo-Lennart wrote:
I friend of my, living far away from me, told me over the phone that he
want me to look to this "death" scope. So I like to be prepared when the
scope comes into my hand.
"Death" scope does not sound so inviting.

When you turn it on, make sure you are wearing rubber boots, gloves and
you are standing on a good rubber mat!

--
Adrian C
Thank You, Adrian....
I will think of that, when I get my hands on that scope. Safety always come first.

Bo-Lennart Karlsson
SWEDEN