Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 13th 21, 03:29 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Oct 2006
Posts: 38
Default SERVICE-MANUAL for HAMEG HM1508-2

Hi....
Is there someone that know where I can get a SEVICE MANUAL for a HAMEG HM1508-2?
I have search the net, but all I can find is an OPERATING MANUAL for HM1508-2. But where can I find a SM?
Anyone know, where I should look?

Best regards from SWEDEN
Bo-Lennart Karlsson
Falun, SWEDEN

  #2   Report Post  
Old February 13th 21, 08:53 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Oct 2020
Posts: 91
Default SERVICE-MANUAL for HAMEG HM1508-2

https://elektrotanya.com/hameg_hm150.../download.html

The internet is your friend.

Peter Wieck
Melrose Park, PA
  #3   Report Post  
Old February 14th 21, 11:24 AM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Oct 2006
Posts: 38
Default SERVICE-MANUAL for HAMEG HM1508-2

lördag 13 februari 2021 kl. 20:53:42 UTC+1 skrev Peter W.:
https://elektrotanya.com/hameg_hm150.../download.html

The internet is your friend.

Peter Wieck
Melrose Park, PA

Thanks Peter....
I've already downloaded that manual. But that's not a SERVICE-MANUAL. It's an OPERATING-MANUAL
There is lots of places on the net where You can get OPERATING-MANUAL for this HAMEG-oscilloscope, but I can't find a site that has a SERVICE-MANUAL.
So I have to look further.
Thanks anyway.

Bo-Lennart Karlsson
Falun, SWEDEN
  #4   Report Post  
Old February 14th 21, 11:57 AM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Sep 2014
Posts: 1,264
Default SERVICE-MANUAL for HAMEG HM1508-2

On 13/02/2021 14:29, Bo-Lennart wrote:
Hi....
Is there someone that know where I can get a SEVICE MANUAL for a HAMEG HM1508-2?
I have search the net, but all I can find is an OPERATING MANUAL for HM1508-2. But where can I find a SM?
Anyone know, where I should look?


use the word 'schematic' in your searches.

https://www.eevblog.com/forum/repair...1507-3-repair/

has links to the SMPS and CRT schematics, which could be similar from
reading through this

https://www.mikrocontroller.net/topic/444998

--
Adrian C
  #5   Report Post  
Old February 14th 21, 12:17 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Aug 2014
Posts: 1,190
Default SERVICE-MANUAL for HAMEG HM1508-2

Bo-Lennart wrote:
==============

lördag 13 februari 2021 kl. 20:53:42 UTC+1 skrev Peter W.:
https://elektrotanya.com/hameg_hm150.../download.html

The internet is your friend.


---------------------------------------------------------------------------
I've already downloaded that manual. But that's not a SERVICE-MANUAL. It's an OPERATING-MANUAL


** ROTFL !!

Peter ****** is a truly * inexhaustible * source of misinformation.

If stupid, wrong info were actual energy - all our AGW problems over due to just one idiot.



..... Phil







  #6   Report Post  
Old February 14th 21, 12:19 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Oct 2006
Posts: 38
Default SERVICE-MANUAL for HAMEG HM1508-2

söndag 14 februari 2021 kl. 11:57:23 UTC+1 skrev Adrian Caspersz:
On 13/02/2021 14:29, Bo-Lennart wrote:
Hi....
Is there someone that know where I can get a SEVICE MANUAL for a HAMEG HM1508-2?
I have search the net, but all I can find is an OPERATING MANUAL for HM1508-2. But where can I find a SM?
Anyone know, where I should look?

use the word 'schematic' in your searches.

https://www.eevblog.com/forum/repair...1507-3-repair/

has links to the SMPS and CRT schematics, which could be similar from
reading through this

https://www.mikrocontroller.net/topic/444998

--
Adrian C

Hi Adrian....
Thanks for replying on my request.
Yes, I have used "schematic" in my search also, but without any luck.
To be honest, I don't have that scope in my hand yet. I friend of my, living far away from me, told me over the phone that he want me to look to this "death" scope. So I like to be prepared when the scope comes into my hand. A death scope can be anything. It could be anything easy or vice versa, right?

OK, Adrian thanks for Your reply.

Bo-Lennart Karlsson
Falun, SWEDEN
  #7   Report Post  
Old February 14th 21, 01:20 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Oct 2020
Posts: 91
Default SERVICE-MANUAL for HAMEG HM1508-2

Off your meds again, Drongo?

Were the OP to put *Service Manual* into that link, it would come up. At least it did for me.

Peter Wieck
Melrose Park, PA
  #8   Report Post  
Old February 14th 21, 08:47 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Aug 2014
Posts: 1,190
Default SERVICE-MANUAL for HAMEG HM1508-2

Peter ****** is a MORON.

=======================

Were the OP to put *Service Manual* into that link, it would come up.



** **** off you tenthwit Google monkey.

BEWARE - of all ham radio guys.


...... Phil
  #9   Report Post  
Old February 14th 21, 09:13 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Sep 2014
Posts: 1,264
Default SERVICE-MANUAL for HAMEG HM1508-2

On 14/02/2021 11:19, Bo-Lennart wrote:
I friend of my, living far away from me, told me over the phone that he
want me to look to this "death" scope. So I like to be prepared when the
scope comes into my hand.

"Death" scope does not sound so inviting.

When you turn it on, make sure you are wearing rubber boots, gloves and
you are standing on a good rubber mat!

--
Adrian C
  #10   Report Post  
Old February 14th 21, 10:08 PM posted to sci.electronics.repair
external usenet poster
 
First recorded activity by DIYBanter: Oct 2006
Posts: 38
Default SERVICE-MANUAL for HAMEG HM1508-2

söndag 14 februari 2021 kl. 21:13:28 UTC+1 skrev Adrian Caspersz:
On 14/02/2021 11:19, Bo-Lennart wrote:
I friend of my, living far away from me, told me over the phone that he
want me to look to this "death" scope. So I like to be prepared when the
scope comes into my hand.
"Death" scope does not sound so inviting.

When you turn it on, make sure you are wearing rubber boots, gloves and
you are standing on a good rubber mat!

--
Adrian C

Thank You, Adrian....
I will think of that, when I get my hands on that scope. Safety always come first.

Bo-Lennart Karlsson
SWEDEN


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hameg HM203-6 schematic Morten Lidegaard Electronic Schematics 0 September 25th 07 03:45 PM
Hameg HM203-6 schematic Morten Lidegaard Electronic Schematics 1 September 20th 07 11:49 PM
Hameg HM408 Oscilloscope help [email protected] Electronics Repair 2 March 13th 06 11:46 AM
Hameg HM204-2 scope on eBay UK NSM Electronics Repair 0 January 23rd 05 07:25 PM
Schematics of HAMEG HM204 oScilloscope da.hunter Electronics Repair 3 February 11th 04 09:25 PM


All times are GMT +1. The time now is 05:44 AM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017