Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Sony KV-27HFR - Vertical Folderover on Bottom
Hi Guys:
I'm at my wits end with this Sony KV-27HFR. Came in with the bottom part of the screen compressed about half way toward the centre, PLUS about 2" of the bottom is folded over. I have replace EVERY cap in/around the vertical chip, as well as the 5521 chip itself (the caps tested bad with the ESR). Vcc measures 27.5, as does the "supply voltage for output". Does anyone know if there is a cap burried somewhere else that I may have overlooked? Thanks for any assistance! Tedd, VE3TJD If replying direct: da (canada should be .ca) |
#2
|
|||
|
|||
Sony KV-27HFR - Vertical Folderover on Bottom
that is a bit different
A scope and-or huntron would help you a great deal perhaps. Walking away from the dogs for awhile also seems to help at times |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
vertical jitter problem (SONY GDM-200PS) | Electronics Repair | |||
Sony KV27TS20 Picture becomes a thin horizontal line - Vertical squashed | Electronics Repair | |||
Zienth Vertical Squish (How do I find and test the Capacitor?) | Electronics Repair | |||
Sony TV vertical interlace problem... | Electronics Repair | |||
Sony KV FX29 Vertical Line on dark images | Electronics Repair |