Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Kitchenaid stove problem
I have a kitchenaid stove/oven kgrt507bal2 (with electronic ctrls) I dont have the manual. It is giving me a PF msg in the big window and F5:E3 in the time window. does anyone know where I can find info on this ? thanks a lot Mike |
#2
|
|||
|
|||
Kitchenaid stove problem
You must contact Kitchenaid for this type of thing. This is an error report
from its microcomputer. -- Greetings, Jerry Greenberg GLG Technologies GLG ========================================= WebPage http://www.zoom-one.com Electronics http://www.zoom-one.com/electron.htm ========================================= "Mike Amick" wrote in message ... I have a kitchenaid stove/oven kgrt507bal2 (with electronic ctrls) I dont have the manual. It is giving me a PF msg in the big window and F5:E3 in the time window. does anyone know where I can find info on this ? thanks a lot Mike |
#3
|
|||
|
|||
Kitchenaid stove problem
Mike Amick wrote:
I have a kitchenaid stove/oven kgrt507bal2 (with electronic ctrls) I dont have the manual. It is giving me a PF msg in the big window and F5:E3 in the time window. does anyone know where I can find info on this ? thanks a lot Mike Here's a few of the codes http://www.appliancestuff.com/codes.html In addition, PF usually indicates "Power Failure" -Bill |
#4
|
|||
|
|||
Kitchenaid stove problem
exray wrote:
Mike Amick wrote: I have a kitchenaid stove/oven kgrt507bal2 (with electronic ctrls) I dont have the manual. It is giving me a PF msg in the big window and F5:E3 in the time window. does anyone know where I can find info on this ? thanks a lot Mike Here's a few of the codes http://www.appliancestuff.com/codes.html In addition, PF usually indicates "Power Failure" -Bill My problem with the door latch switch was from something being spilled on the surface and it dripped down inside to a protective baffel where it then dripped on to the door latch switch. The switch is a "microswitch" and could have been cleaned (probably) but it was replaced with a new one. Bill K7NOM |
#5
|
|||
|
|||
Kitchenaid stove problem
exray writes:
Mike Amick wrote: I have a kitchenaid stove/oven kgrt507bal2 (with electronic ctrls) I dont have the manual. It is giving me a PF msg in the big window and F5:E3 in the time window. does anyone know where I can find info on this ? thanks a lot Mike Here's a few of the codes http://www.appliancestuff.com/codes.html In addition, PF usually indicates "Power Failure" Did he try resetting it? --- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/ Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/ +Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm | Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html Important: The email address in this message header may no longer work. To contact me, please use the feedback form on the S.E.R FAQ Web sites. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Boiler Problem Gradually Getting Worse | UK diy | |||
High voltage problem with JVC AV27BP4 TV | Electronics Repair | |||
CRT Contrast Problem | Electronics Repair | |||
Sears air compressor starting problem | Woodworking |