Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
I have an 8-year-old Yamaha receiver.
1. Recently the digital display has been dropping out when the receiver is in tuner mode (where it fills the window with settings). The display will alternate between the normal display, being completely empty, and having four dashes centered in the display. When in CD, tape, and other modes where it displays just those characters in the window it looks fine. 2. Controlling the receiver with its remote has also gotten weird. If I turn on the receiver with the remote, the Input knob rotates back and forth among the different choices and eventually settles randomly on one of the options (phono, cd, tuner, tape, etc.). If I use the remote to specify one of these options, i.e., tuner, the Input knob bounces around a bit and eventually (but not always) settles on the option I selected. Any ideas what's causing these behaviors and how I might fix them? Thanks! George |
#2
![]() |
|||
|
|||
![]()
Not sure about the display problem - could be solder connections.
The input selector is a notorious failure item on these. Not a do-it-yourself type of repair for most people. The replacement selector switch is an improved type. Mark Z. "George Earl" wrote in message ... I have an 8-year-old Yamaha receiver. 1. Recently the digital display has been dropping out when the receiver is in tuner mode (where it fills the window with settings). The display will alternate between the normal display, being completely empty, and having four dashes centered in the display. When in CD, tape, and other modes where it displays just those characters in the window it looks fine. 2. Controlling the receiver with its remote has also gotten weird. If I turn on the receiver with the remote, the Input knob rotates back and forth among the different choices and eventually settles randomly on one of the options (phono, cd, tuner, tape, etc.). If I use the remote to specify one of these options, i.e., tuner, the Input knob bounces around a bit and eventually (but not always) settles on the option I selected. Any ideas what's causing these behaviors and how I might fix them? Thanks! George |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Kenwood Stereo Receiver KR-5040 problem. | Electronics Repair | |||
Sony KV27TS29 (Audio) | Electronics Repair | |||
Audio problem with Sharp cd player. | Electronics Repair |