Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Do musos know how shoddy their expensive kit is?
Another Marshall 2266 this time from 2009. The input guitar lead socket
soldering looks ok under x30 viewing but 3 of the 4 pins pull through the solder with very little force, just that required to straighten the slight bend placed there after insertion, the fourth pin pulled out with a bit more force but still mush less than a proper traditional solder joint (that would usually break the metal of the pin rather than break the solder joint). Nasty grey appearance of where the solder blobs were and very little sign of ever having been wetted. No mention of PbF on the overlays but solder generally looks PbF and RoHS on the mains Tx. N382 compliance? mark on the rear , coded speak for PbF ? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Shoddy shed shingling | Home Repair | |||
Shoddy work, no permits, buildings collapsing | Home Repair | |||
Shoddy work | Home Repair | |||
Fedders Air Condititioner: Shoddy | Home Repair | |||
Amerispec (Brent Chappel), ServiceMaster Consumer Services Do Shoddy Work! | Home Ownership |