Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 555
Default JEDEC for technicians

JEDEC seems to be into memory specs these days and no longer into basic
semiconductor devices.

There was a time when JEDEC and PRO ELECTRON held some sway over part
numbers and such. JEDEC seems to still be into semiconductor device package
standards, however.

4N and 6N part numbers are out there. They seem to be beyond the old JEDEC
system and relate to opto-couplers.

Is there an expanded/updated version of the 1N, 2N, 3N JEDEC system?

  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,716
Default JEDEC for technicians


"Charles is Off with the Fairies "

JEDEC seems to be into memory specs these days and no longer into basic
semiconductor devices.

There was a time when JEDEC and PRO ELECTRON held some sway over part
numbers and such. JEDEC seems to still be into semiconductor device
package standards, however.

4N and 6N part numbers are out there. They seem to be beyond the old
JEDEC system and relate to opto-couplers.

Is there an expanded/updated version of the 1N, 2N, 3N JEDEC system?



** Wot is this loon on about ?

The JEDEC device numbering system was of benefit only to manufacturers.

A 2Nxxxx number could be a transistor of either polarity, a J-FET or a
bloody triac!!!


...... Phil





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shortage of scientists, engineers, and technicians [again] Don Foreman Metalworking 2 November 6th 07 02:15 AM
Shortage of scientists, engineers, and technicians [again] Don Foreman Metalworking 0 November 4th 07 07:47 PM
Porter-Cable 8501 question for electrical engineers / technicians / electricians only george Woodworking 12 January 26th 06 08:37 PM
Any Canadian Technicians around??? Rono Electronics Repair 1 June 30th 05 03:52 PM
Association of Professional Television Technicians. w4clm Electronics Repair 1 December 24th 04 06:04 AM


All times are GMT +1. The time now is 11:10 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"