 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Washing machine motor won't start, bad triac ?
After reflowing everything on the controller board and reseating
the connectors it still won't work. The motor of the washing machine spins for a few degrees and stops. You can get it to spin (slowly) by pulling on the belt but only in one direction ! Lots of sparks inside the motor. The brushes are good and the motor seems mechanically fine. I suspect the triac (ST BTB16 600CI). Plausible ? Thanks in advance. -- André Majorel http://www.teaser.fr/~amajorel/ "The object of this year's expedition is to see if we can find trace of last year's expedition." |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Washing machine motor brushes | UK diy | |||
| Test a Washing Machine Triac | UK diy | |||
| Washing machine - start agitate cycle? | Home Ownership | |||
| washing machine motor | Electronics Repair | |||
| Washing machine motor | Metalworking | |||
Threaded Mode
