After reflowing everything on the controller board and reseating
the connectors it still won't work.
The motor of the washing machine spins for a few degrees and
stops. You can get it to spin (slowly) by pulling on the belt
but only in one direction ! Lots of sparks inside the motor.
The brushes are good and the motor seems mechanically fine.
I suspect the triac (ST BTB16 600CI). Plausible ?
Thanks in advance.
--
André Majorel
http://www.teaser.fr/~amajorel/
"The object of this year's expedition is to see if we can find
trace of last year's expedition."