On 2/11/2011 2:32 PM, Andre Majorel wrote:
After reflowing everything on the controller board and reseating
the connectors it still won't work.

The motor of the washing machine spins for a few degrees and
stops. You can get it to spin (slowly) by pulling on the belt
but only in one direction ! Lots of sparks inside the motor.

The brushes are good and the motor seems mechanically fine.
I suspect the triac (ST BTB16 600CI). Plausible ?

Thanks in advance.


does the motor have a start capacitor and a centrifugal
speed switch to disconnect it?

Jeff