Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to sci.electronics.design,sci.electronics.equipment,sci.electronics.repair
|
|||
|
|||
![]()
On Thu, 30 Jul 2009 04:59:49 -0700, "William Sommerwerck"
wrote: IN a bubble jet. IN an InkJet are you sure the same mechanisms are utilized? The original inkjet printer -- which dates back more than 40 years -- mechanically squirted a stream of droplets at the paper, deflecting the unused droplets electrostatically for recycling. The thermal inkjet was based on the discovery that heating the end of a tube containing ink would boil the ink and cause a drop to squirt out. This "on-demand" system made cheap inkjet printers possible. The term 'bubble jet' however, is no more than a mere copyrighted process name tag, just like "Teflon' is or "Kotex". |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Circuit to connect "Soundblaster" electret microphone to line-input | Electronics | |||
Unwise to connect 11/4" drain to 11/2" trap? | Home Repair | |||
"Plgn Motor Error" on "TI Microlaser Plus" printer | Electronics Repair | |||
UPDATE: "Problem with Canon Pixma ip4000 printer" | Electronics Repair |