Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the screen
does briefly display a Samsung logo. Any help or advice on this beast
would be greatly appreciated.

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the
screen does briefly display a Samsung logo. Any help or advice on
this beast would be greatly appreciated.
I guess thats a "No" then............

In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the
screen does briefly display a Samsung logo. Any help or advice on
this beast would be greatly appreciated.
I guess thats a "No" then............

You might ask on one of the Mac groups...

Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the
screen does briefly display a Samsung logo. Any help or advice on
this beast would be greatly appreciated.
I guess thats a "No" then............

You might ask on one of the Mac groups...


About a Samsung monitor?

I haven't dealt with one of those personally, but a good place to start
is figuring out how the touch sensing works.

In article MmlUj.7725$0L.5375@trnddc07,
James Sweet wrote:

Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the
screen does briefly display a Samsung logo. Any help or advice on
this beast would be greatly appreciated.
I guess thats a "No" then............

You might ask on one of the Mac groups...


About a Samsung monitor?

I haven't dealt with one of those personally, but a good place to start
is figuring out how the touch sensing works.

They were marketed to Mac users.

Smitty Two wrote:
In article MmlUj.7725$0L.5375@trnddc07,
James Sweet wrote:

Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the
screen does briefly display a Samsung logo. Any help or advice on
this beast would be greatly appreciated.
I guess thats a "No" then............
You might ask on one of the Mac groups...

About a Samsung monitor?

I haven't dealt with one of those personally, but a good place to start
is figuring out how the touch sensing works.

They were marketed to Mac users.


Those don't tend to be the most technical people. I think this group is
as good as any for someone wanting to repair it.

"James Sweet" wrote in message
news:MmlUj.7725$0L.5375@trnddc07...

Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I
assume that they are touch controls. On powering up, the screen
actually displays beautifully, but none of the touch controls do
anything. It seems that the Eyegonomic company has vanished. At
power up the screen does briefly display a Samsung logo. Any help
or advice on this beast would be greatly appreciated.
I guess thats a "No" then............

You might ask on one of the Mac groups...


About a Samsung monitor?

I haven't dealt with one of those personally, but a good place to
start is figuring out how the touch sensing works.
Right, that is what I am after. As there are apparently no embedded
wires/leds around the glass etc I am assuming its some sort of
capacitive or inductive sensing. Not had it opened yet. BTW I have it
plugged in to a Compaq laptop just to test it. Do you know if there
was something specifically different with the video connector on the
Mac? (Just wondering why they were marketed to Mac users.) They were
about 450 UKP when new, so quite high-end I think.

In article 3gxUj.3816$Ve.3121@trnddc08,
James Sweet wrote:

Smitty Two wrote:
In article MmlUj.7725$0L.5375@trnddc07,
James Sweet wrote:

Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I assume
that they are touch controls. On powering up, the screen actually
displays beautifully, but none of the touch controls do anything. It
seems that the Eyegonomic company has vanished. At power up the
screen does briefly display a Samsung logo. Any help or advice on
this beast would be greatly appreciated.
I guess thats a "No" then............
You might ask on one of the Mac groups...

About a Samsung monitor?

I haven't dealt with one of those personally, but a good place to start
is figuring out how the touch sensing works.

They were marketed to Mac users.


Those don't tend to be the most technical people. I think this group is
as good as any for someone wanting to repair it.

I agree 100%. And, no one here responded to the OP's first post * nor
the second with anything useful * so I was merely suggesting another
possible avenue. And FWIW, mac guys tend to be about a dozen times more
technical than PC guys, as a group.

R.Smith wrote:
"James Sweet" wrote in message
news:MmlUj.7725$0L.5375@trnddc07...
Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...
Anyone any experience of these? Its circa 2003 and has various
controls marked on the fascia beneath an overall glass screen,
including an on/off switch symbol. From this configuration I
assume that they are touch controls. On powering up, the screen
actually displays beautifully, but none of the touch controls do
anything. It seems that the Eyegonomic company has vanished. At
power up the screen does briefly display a Samsung logo. Any help
or advice on this beast would be greatly appreciated.
I guess thats a "No" then............
You might ask on one of the Mac groups...

About a Samsung monitor?

I haven't dealt with one of those personally, but a good place to
start is figuring out how the touch sensing works.
Right, that is what I am after. As there are apparently no embedded
wires/leds around the glass etc I am assuming its some sort of
capacitive or inductive sensing. Not had it opened yet. BTW I have it
plugged in to a Compaq laptop just to test it. Do you know if there
was something specifically different with the video connector on the
Mac? (Just wondering why they were marketed to Mac users.) They were
about 450 UKP when new, so quite high-end I think.




No, these days they're just standard interfaces. I bet if you take the
back off the thing it'll be pretty clear how the touch sensing works,
I'm curious myself now.

"James Sweet" wrote in message
news:QzGUj.20161$Fv.7189@trnddc03...

R.Smith wrote:
"James Sweet" wrote in message
news:MmlUj.7725$0L.5375@trnddc07...
Smitty Two wrote:
In article ,
"R.Smith" wrote:

"R.Smith" wrote in message
...

I haven't dealt with one of those personally, but a good place to
start is figuring out how the touch sensing works.
Right, that is what I am after. As there are apparently no embedded
wires/leds around the glass etc I am assuming its some sort of
capacitive or inductive sensing. Not had it opened yet. BTW I have
it plugged in to a Compaq laptop just to test it. Do you know if
there was something specifically different with the video connector
on the Mac? (Just wondering why they were marketed to Mac users.)
They were about 450 UKP when new, so quite high-end I think.


No, these days they're just standard interfaces. I bet if you take
the back off the thing it'll be pretty clear how the touch sensing
works, I'm curious myself now.

Aha! a fellow inquiring mind! Yes, I cant resist it...I will open it
up and see what I can find and report back as soon as I have time.
Ron