Checking the coding function of the r/c, not something I do very often.
Manufacturer's original for controlling amp,tuner and CD but with 3
different receivers, one for each separate, from one IR controller.

The ident "pulse" code for all button presses, was always 101 then one bit
that alternated 0 or 1 on each successive keypress , whether the same key or
another one, then its inverse as a bit, then 011 then 18 bit function code
that was always consistent for the same button.
What was this alternating fourth/fifth bit all about? it was normal function
by the way


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

N_Cook wrote in message
...
Checking the coding function of the r/c, not something I do very often.
Manufacturer's original for controlling amp,tuner and CD but with 3
different receivers, one for each separate, from one IR controller.

The ident "pulse" code for all button presses, was always 101 then one bit
that alternated 0 or 1 on each successive keypress , whether the same key
or
another one, then its inverse as a bit, then 011 then 18 bit function code
that was always consistent for the same button.
What was this alternating fourth/fifth bit all about? it was normal
function
by the way


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/






No numeric keypad on this R/C but presumably uses a GP chipset.
So avoids say keypresses 123 being misinterpreted as 1123 if the signal is
blocked while pressing the 1.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/