Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 11
Default Philips 27PT6442/37 will not turn on.

Hello everyone, having another problem with Philips. TV set will not
turn on.
Heard relay clicks after plug it in. After pushing power button green
LED goes on
for about 15 seconds then light goes of for about 7 seconds and then
starts blinking (3 blinks, pause 2 blinks, pause and 1 long blink
about 3 sec.).
I would appreciate any help. Mike.

  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1
Default Philips 27PT6442/37 will not turn on.

On Nov 14, 4:52 am, Mike wrote:
Hello everyone, having another problem with Philips. TV set will not
turn on.
Heard relay clicks after plug it in. After pushing power button green
LED goes on
for about 15 seconds then light goes of for about 7 seconds and then
starts blinking (3 blinks, pause 2 blinks, pause and 1 long blink
about 3 sec.).
I would appreciate any help. Mike.


Hi Mike-
I've got the same thing going on. Rumor had it I could just replace
the fuse next to the power input, but that has not worked.

  #3   Report Post  
Posted to sci.electronics.repair
b b is offline
external usenet poster
 
Posts: 764
Default Philips 27PT6442/37 will not turn on.



ha escrito:
On Nov 14, 4:52 am, Mike wrote:
Hello everyone, having another problem with Philips. TV set will not
turn on.
Heard relay clicks after plug it in. After pushing power button green
LED goes on
for about 15 seconds then light goes of for about 7 seconds and then
starts blinking (3 blinks, pause 2 blinks, pause and 1 long blink
about 3 sec.).
I would appreciate any help. Mike.


Hi Mike-
I've got the same thing going on. Rumor had it I could just replace
the fuse next to the power input, but that has not worked.


could be any number of things. power supply may be in protection due
to a short on one of the outputs or line stage. could be bad frame
chip. bad caps. some philips sets had duff CRTs. bad soldering. bad
micro..... you'd be better off taking it to a repair place. A tech
will soon be able to identify the cause.

-B
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
27PT6442/37 Blown Fuse Steve Electronics Repair 0 September 27th 07 04:23 AM
Phillips TV model 27PT6442/37, Ch. LO4.UAA draws 12A on startup [email protected] Electronics Repair 2 March 5th 07 04:02 AM
philips tv 21GL1452/55 -- at turn on very bright, but normal after 10 min aldo Electronics Repair 1 December 19th 06 09:25 PM
32" 30PW9110DL Philips TV won't turn on [email protected] Electronics Repair 0 October 17th 06 01:13 AM
Philips projection TV 43PP8420 Wont turn on Prabadisha Electronics Repair 1 December 13th 04 06:24 AM


All times are GMT +1. The time now is 03:28 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"