Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Looking for tape-path alignment mirror cassette

Hello,

I'm looking for an tape-path alignment mirror-cassette to align
the tape-path of my AKAI GX-F71 cassette-deck. Anynone knows a
source for these nowadays or has one and is willing to sell ?

There is one shown under the following URL (second tape):

http://mb.abovenet.de/Project_C-90/tapes_konig.htm


Best Regards,

Adrian
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 6,772
Default Looking for tape-path alignment mirror cassette


"Adrian Glaubitz" wrote in message
...
Hello,

I'm looking for an tape-path alignment mirror-cassette to align
the tape-path of my AKAI GX-F71 cassette-deck. Anynone knows a
source for these nowadays or has one and is willing to sell ?

There is one shown under the following URL (second tape):

http://mb.abovenet.de/Project_C-90/tapes_konig.htm


Best Regards,

Adrian


I have the Konig one and if it is still available, I would thoroughly
recommend it. It does exactly what it says on the can, as they say. In fact
I have the full set of Konig test tapes including speed strobe, torque
meter, azimuth, flutter, 0dB etc, and they are all very good, with the
recorded levels correct within a decimal or so of the value printed on the
tape.

Arfa


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tape path height alignment on Philips VR 232 / 12 Simoc Electronics Repair 5 November 24th 06 12:19 PM
SONY Dual Cassette Tape Deck would not Eject Tape AVFan Electronics Repair 2 October 26th 06 03:18 PM
How to Adjust the Tape Path Alignment on Newer VCRs Jim Electronics Repair 24 March 15th 04 09:30 PM
Cassette Tape Player indago Electronics Repair 0 September 29th 03 12:36 PM
Car cassette player will eject and not play tape Jeff Electronics Repair 0 August 16th 03 01:50 AM


All times are GMT +1. The time now is 06:52 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"