Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Cassette Tape Player
I am working on a JVC Model UX-RT1 combo CD player, audio cassette player,
AM/FM stereo radio system. The system works with a remote and has a lot of motor drives. The cassette player head does not engage the tape, although the tape drive works and the tape moves at playing speed and fast forward. The tape head system is on a moving plate that also engages the pinch rollers, which also do not engage. I have removed the mechanism from the case and have encountered a flat cable from the tape head mechanism to the audio board on a connector marked CN301. In the Service Manual it indicates to "disconnect" the flat cable from the connector. I attempted to just pull it out of the connector, but it doesn't come easily and I don't want to break anything; these connectors seem to be so fragile. How does this flat cable connect into the connector, and what does it take to get it out? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Car cassette player will eject and not play tape | Electronics Repair | |||
Portable Cassette Player w/Recording Capabilities | Electronics | |||
Fisher cassette heads | Electronics Repair |