Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Marshall amps - bent "gold" facia strips
Bent away from the chassis, but not creased. These facia are relatively
thick and have quite a forceful set (springiness) in the bend. Other than contact glue and clamping back is there a pre-treatment in the way of annealing the metal or something to remove the set. ? Otherwise it is likely strong enough to overcome the glue, as metal to metal. -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|