Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic remote control model# eur7603z9a
Remote just died one day, didn't drop it or any physical damage. Tried
new batteries, I have voltage throughout the circuit board all the way up to the infrared LED. The backlight LEDs and the DBS LED flash shortly once while I connect B+. Most of the Test Points indicate switch activity, but no switch indication returned to the LED under the switch button Eg: TV, VCR... The crystal looks like it is working just fine. The infrared LED checks OK. I have inspected with a microscope as best as I can for a cracked run, but the switch side is covered by a white coating making it impossible for visual inspection. A replacement remote is right at $50, and I'm not sure if a universal will have all the options. They went to the trouble of putting Test Points on the board, so I figured there may be some info/schematics floating around somewhere. Any help would be greatly appreciated. Bill |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Panasonic AG-A11 Wired Remote Control | Electronics Repair | |||
Jasco remote "1 Control" model 8273 codes needed | Electronics Repair | |||
GE (Panasonic ) VCR model 1VCR4002X old top loader wired remote questio | Electronics Repair | |||
remote control | UK diy | |||
TV Remote Control rubber pad(UR50CT1071) used in remote control for Panasonic TV Model TX-29GF10X | Electronics Repair |