Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Philips PM3262 Oscope Failure Help needed
I picked up a Philips PM3262 Oscope at my town's recycling center. it
looks like it has been well used. I plugged it in and turned it on. It worked normally for about 2 minutes and then shut down. The ckt breaker on it did not pop. The "ON" light was off. After I let it sit for a while, this repeated. I don't have schematics and when I took the covers off I did not see anything obviously out of kilter. Has anyone had this problem and fixed it easily? If so, could you post the fix? Thanks in advance. Al |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mains failure switch-over circuit needed | Electronics | |||
Viewing an ohms change on an oscope??? | Electronics | |||
Eico 460 oscope | Electronics Repair | |||
Philips TV schematic needed | Electronics Repair | |||
Philips K11 Needed | Electronics Repair |