Meat Plow wrote:
Who would have thought this one up?

http://youtube.com/watch?v=HpovwbPGEoo



Wow, that's cool! Of course I'm admittedly a pyro, but still!

"James Sweet" wrote in message
news:R7wAh.2377$II6.2171@trnddc07...
Meat Plow wrote:
Who would have thought this one up?

http://youtube.com/watch?v=HpovwbPGEoo



Wow, that's cool! Of course I'm admittedly a pyro, but still!

Yeah I agree that is pretty cool! Anyone have any info on building one
other than the obvious?

An iron pipe would be a lot safer.

Meat Plow wrote:

2.5" PVC tubing, 2.5" speaker maybe some putty for the end where propane
is fed, aluminum foil. Glue the foil to the area where the holes are to be
drilled. I'm guessing the holes would be 1/4 inch.

I had considered using a piece of steel electrical conduit for this project
so that it wouldn't be too hard to drill.

- Mike

"Meat Plow" wrote in message
news
On Wed, 14 Feb 2007 09:49:04 -0600, Mike Berger Has Frothed:

An iron pipe would be a lot safer.

Yes and alot harder to drill a hundred holes in not to mention a lot
heavier.

Meat Plow wrote:

2.5" PVC tubing, 2.5" speaker maybe some putty for the end where propane
is fed, aluminum foil. Glue the foil to the area where the holes are to
be
drilled. I'm guessing the holes would be 1/4 inch.

--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004

COOSN-266-06-25794

Michael Kennedy wrote:

I had considered using a piece of steel electrical conduit for this project
so that it wouldn't be too hard to drill.


Thin wall, or rigid? Thin wall will require a deburring tool to
remove the internal burrs. Thick wall is the same as galvanized water
pipe, but with a smoother internal finish.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

"Michael A. Terrell" wrote in message
...
Michael Kennedy wrote:

I had considered using a piece of steel electrical conduit for this
project
so that it wouldn't be too hard to drill.


Thin wall, or rigid? Thin wall will require a deburring tool to
remove the internal burrs. Thick wall is the same as galvanized water
pipe, but with a smoother internal finish.


Hmm.. Guess thats why he used PVC and aluminum tape. Much easier.

- Mike