 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Crossover resistors
After a speaker cabinet went out on me I took it apart and tested each
speaker , 3inch,4inch and a 15 inch. All seemed fine. I replaced the 2 caps (1.5 and a 6) and the resistors (5w 2.2 Ohm) .These are the same values as the old ones. Almost no sound was making its way to to the 3 or 4 inch. speakers. I removed the resistors and it sounds as good as it used to. My question is what funtion does the resistor play? Does it protect the speakers from overload? Thanks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Infinity crossover coil value | Electronics Repair | |||
| Resistors | UK diy | |||
| Crossover vehicle access | UK diy | |||
| REQ: Apogee Acoustics Mini-Grand DAX crossover info | Electronics Repair | |||
| Help identifying these resistors from a speaker crossover | Electronics Repair | |||
Threaded Mode
